Inflate, deflate and read your tyre pressure in a single action. Checking and adjusting tyre pressure means safety and savings. This inflator connects to the compressor with a quick connector and lets you inflate, deflate and read the pressure in a single action.
Choose the standard model, with an aluminium body, a rubber-protected 63 mm gauge and a dual bar/psi scale, or the professional model approved to EN 12645:2014, with an 80 mm gauge and a 1-metre hose, designed for workshops.
Advantages
Direct reading: you see the pressure as you inflate.
Quick connection: connects to and disconnects from the compressor instantly.
Protected gauge: rubber cover on the standard model.
Approved: the 80 mm model complies with EN 12645:2014.
1 m hose: on the professional model, making it easy to reach every wheel.
What it is for
Mechanical and tyre workshops and fleets.
Service stations and dealerships.
Home use: car, motorbike, bicycle, trailer.
Agricultural and construction machinery.
Technical specifications
Standard: aluminium body, Ø 63 mm gauge with rubber protector, 0-12 bar / 0-174 psi scale, 30 cm hose, 1/4" quick connector
Approved: EN 12645:2014 standard, Ø 80 mm gauge reading in bar, 1 m hose, ergonomic handle, maximum pressure 12 bar
Connection to compressor: quick connector
Vetonek tip
Always measure the pressure when the tyres are cold, before driving, and compare it with the vehicle label (door or fuel filler flap). Check the hose and nozzle from time to time: even a small leak distorts the reading.
Frequently asked questions
What is the difference between the two?
The standard model is for general use; the approved model has a larger gauge (80 mm), a 1 m hose and complies with EN 12645:2014 for professional use.
What units does it measure in?
The standard model in bar and psi; the approved model in bar.
What is the maximum pressure?
Both have a scale up to 12 bar.
Is it suitable for any compressor?
Yes, using a quick connection to the hose coupler.
Can I deflate with it?
Yes, it lets you adjust the pressure by releasing air until you reach the desired value.
Frequently Asked Questions
What is the difference between the two?
The standard model is for general use; the approved model has a larger gauge (80 mm), a 1 m hose and complies with EN 12645:2014 for professional use.
What units does it measure in?
The standard model in bar and psi; the approved model in bar.
What is the maximum pressure?
Both have a scale up to 12 bar.
Is it suitable for any compressor?
Yes, using a quick connection to the hose coupler.
Can I deflate with it?
Yes, it lets you adjust the pressure by releasing air until you reach the desired value.
Todo excelente. Tras una primera equivocación con el producto elegido, el equipo de atención al cliente se puedo a trabajar para solucionar el problema y darme una solución adecuada.
