Loosening wheel nuts or rusty fixings with a wheel brace is slow and exhausting. With this Michelin 1/2" pneumatic impact wrench set you do it in seconds: up to 350 Nm of torque to loosen effortlessly and run bolts in at full speed.
It arrives ready to work in its carry case, with 1/2" chrome vanadium sockets of 11, 12, 13, 14, 17, 19, 22 and 24 mm, a 3/8" adapter and a seal. Everything you need for changing wheels and removing fixings in the workshop, organised and to hand.
✅ Key benefits
Maximum torque of 350 Nm: enough to loosen the wheel nuts of cars and vans.
Complete set in a carry case: wrench, 8 sockets, 3/8" adapter and seal.
Michelin brand: a benchmark pneumatic tool in workshops.
Consumption of 220 L/min at 6 bar: works with standard workshop compressors.
3/8" adapter: so you can also use 3/8" sockets on smaller fixings.
🏗️ What it is for
Changing wheels in mechanical and tyre workshops.
Removing fixings from suspensions, brakes and subframes.
Maintenance of agricultural machinery and light industrial vehicles.
Assembly and disassembly of bolted structures.
📋 Technical specifications
Brand: Michelin
Square drive: 1/2"
Maximum torque: 350 Nm
Air consumption: 220 L/min
Working pressure: 6 bar
Sockets included: 1/2": 11, 12, 13, 14, 17, 19, 22 and 24 mm
Includes: 3/8" adapter, seal and carry case
💡 Vetonek tip: when tightening wheels, do the final tightening with a torque wrench: the impact wrench is for loosening and running nuts in. Put a few drops of pneumatic oil into the air inlet every working day and drain the water from the tank to extend the life of the mechanism.
Frequently asked questions
What compressor do I need?
One that delivers at least 220 L/min at 6 bar; with a tank of 50 L or more you will work more continuously.
Which sockets are included?
1/2" sockets of 11, 12, 13, 14, 17, 19, 22 and 24 mm, plus a 3/8" adapter.
What torque does it have?
Up to 350 Nm.
Can I tighten wheels with it?
Use it to run the nuts in and do the final tightening with a torque wrench to the torque specified by the vehicle manufacturer.
What hose do I need?
An air hose with a quick coupler and a large enough inside diameter so as not to lose air flow; a 6 x 12 mm rubber hose is a good choice for the workshop.
Frequently Asked Questions
What compressor do I need?
One that delivers at least 220 L/min at 6 bar; with a tank of 50 L or more you will work more continuously.
Which sockets are included?
1/2" sockets of 11, 12, 13, 14, 17, 19, 22 and 24 mm, plus a 3/8" adapter.
What torque does it have?
Up to 350 Nm.
Can I tighten wheels with it?
Use it to run the nuts in and do the final tightening with a torque wrench to the torque specified by the vehicle manufacturer.
What hose do I need?
An air hose with a quick coupler and a large enough inside diameter so as not to lose air flow; a 6 x 12 mm rubber hose is a good choice for the workshop.
Todo excelente. Tras una primera equivocación con el producto elegido, el equipo de atención al cliente se puedo a trabajar para solucionar el problema y darme una solución adecuada.
