Skip to product information
  • Ladrillo hueco sencillo Irun para tabiques - Vetonek
  • Ladrillo hueco sencillo Irun para tabiques - Vetonek

Single hollow brick Irun for partitions

292,04 €
292,04 €

Delivery in 3–9 days

Tax included. Shipping calculated at checkout.
Packaging
Size

Single hollow brick Irun for partitions

Thin, fast partition walls that gain space in every room

The Vetonek Irun single hollow brick is the ideal piece for lightweight partitioning: at just 4.5 cm thick and with a large 32 x 14.5 cm format, it covers a lot of surface with few pieces and barely takes any usable floor space from the home.

✅ Advantages

  • High coverage: about 20 pieces per m², fewer joints and fewer hours.
  • Thin: 4.5 cm thick, ideal for room layouts and cavity walls.
  • Lightweight: 1.92 kg per piece.
  • Easy to finish: good adhesion for plaster and mortar.

🏗️ Applications

  • Interior partition walls.
  • Wall linings and inner leaf of cavity walls.
  • Closing off openings, ducts and boxed-in areas.
  • Renovations where every centimeter counts.

📋 Technical data

  • Dimensions: 32 x 14.5 x 4.5 cm (±10%).
  • Weight: 1.92 kg/unit.
  • Coverage: ≈20 units/m².
  • Pallet: 480 units, ≈922 kg.
  • Material: fired clay.

🧮 How much do I need?

For 40 m² of partition wall: 40 × 19.9 ≈ 796 units → 2 pallets of 480 units (960 units, about 48 m²) leave you a margin for cuts and breakage.

📦 Sales formats

  • Pallet of 480 units (24.12 m²), ≈922 kg

Pallets of up to 1,000 kg delivered by truck.

🧰 Installation

  1. Mark out the partition wall and set up guide rods.
  2. Lay the first course perfectly level.
  3. Bed with gypsum plaster paste or mortar, thin joints, staggered head joints.
  4. Check each course for plumb; do not load it with heavy items without reinforcement.
  5. Leave 1-2 cm below the slab and finish with plaster or foam.

💡 Vetonek Tip: To hang kitchen cabinets or radiators on a 4.5 cm partition wall, use anchors specifically designed for hollow brick or reinforce the area.

Frequently asked questions

What is the Irun single hollow brick used for?

It is used for lightweight partitioning: interior partition walls, wall linings, the inner leaf of cavity walls, closing off openings, ducts and boxed-in areas, and renovations where every centimeter counts.

What are its dimensions and weight?

It measures 32 x 14.5 x 4.5 cm (±10%) and weighs 1.92 kg per unit. It is a thin, lightweight fired clay piece that barely takes any usable space from the home.

How many pieces do I need per square meter?

You need about 20 pieces per m². For example, for 40 m² of partition wall, calculate about 796 units, that is, 2 pallets of 480 units, which leave you a margin for cuts and breakage.

How is it sold?

It is sold by the pallet of 480 units, which covers about 24.12 m² and weighs about 922 kg. Pallets are up to 1,000 kg and are delivered by truck, as per the description.

Can I hang furniture on a partition wall made of this brick?

The partition wall is only 4.5 cm thick, so to hang kitchen cabinets or radiators you should use anchors specifically designed for hollow brick or reinforce the area. Do not load it with heavy items without reinforcement.

Frequently Asked Questions

How many pieces per m²?
Approximately 20 pieces per m².

How thick is the partition?
4.5 cm of brick; with a finish on both faces it ends up at around 7 cm.

How much does a pallet weigh?
About 922 kg with 480 pieces.

Is it suitable for load-bearing walls?
No, it is a unit for partitions and wall linings with no structural function.

What is it laid with?
Gypsum plaster or masonry mortar.

Can it be left exposed?
No, it is a brick designed to be finished.

How is it delivered?
On a full pallet under 1,000 kg, delivered by truck.