Walls with mass and strength for load-bearing walls, party walls and façades
The Vetonek Gernika perforated brick is a 24.5 x 11.2 x 9.5 cm unit with vertical perforations: heavier and stronger than a hollow brick, designed for load-bearing walls, party walls and masonry that needs mass and good mortar grip.
✅ Advantages
Greater strength: vertical perforations and thick walls for load-bearing masonry.
More mass: 2.20 kg per piece, better acoustic insulation.
Great grip: the mortar fills the perforations and locks the masonry together.
Classic format: 24.5 cm, compatible with any bond pattern.
🏗️ Applications
Load-bearing walls and party walls.
Main leaf of façades to be rendered or clad.
Pilasters, starter courses and plinths.
Low walls, built-in masonry barbecues and masonry bases.
📋 Technical data
Dimensions: 24.5 x 11.2 x 9.5 cm (±10%).
Weight: 2.20 kg/pc.
Coverage: ≈36 pcs/m² in a half-brick wall.
Pallet: 360 pcs, ≈792 kg.
Material: fired clay.
🧮 How much do I need?
For 20 m² of half-brick wall: 20 × 36.3 ≈ 726 pcs → 2 pallets of 360 pcs (720 pcs); add a third if there are many finishing details or pilasters.
📦 Sales formats
Pallet of 360 pcs (9.92 m²), ≈792 kg
Pallets of up to 1,000 kg delivered by truck.
🧰 Laying
Set out the wall and place the guide lines.
Dampen the bricks in hot weather.
Lay with masonry mortar, with well-filled joints of ≈1 cm.
Stagger the vertical joints by half a brick.
Check plumb and level every 3-4 courses.
💡 Vetonek tip: For load-bearing walls, always follow the project specifications: the strength of the wall depends on the bond, the mortar and the thickness, not just on the brick.
Frequently asked questions
What are the dimensions and weight of the Gernika perforated brick?
It measures 24.5 x 11.2 x 9.5 cm (±10%) and weighs 2.20 kg per unit. It is a fired clay brick with vertical perforations, heavier and stronger than a hollow brick.
What is it used for?
It is used for load-bearing walls and party walls, as the main leaf of façades to be rendered or clad, for pilasters, starter courses and plinths, and for low walls and built-in masonry barbecues. It provides mass and good mortar grip.
How many bricks do I need per square meter?
In a half-brick wall you need about 36 pcs/m². For example, for 20 m² of wall, count on about 726 units, that is, 2 pallets of 360 pcs, and add a third if there are many finishing details or pilasters.
How is it sold?
It is sold by the pallet of 360 units, which covers about 9.92 m² and weighs about 792 kg. Pallets are a maximum of 1,000 kg and are delivered by truck, according to the description.
Is it suitable for load-bearing walls?
It is designed for load-bearing walls, but the description reminds that the strength of the wall depends on the bond, the mortar and the thickness, not just on the brick. For load-bearing walls, always follow the project specifications.
Frequently Asked Questions
How many bricks per m²?
About 36 per m² in a half-brick wall.
How much does a pallet weigh?
About 792 kg with 360 bricks.
Is it suitable for load-bearing walls?
Yes, it is suitable for load-bearing masonry, always in line with the structural calculations of the project.
Can it be left exposed?
It is designed to be rendered; for an exposed façade, use a facing brick.
Which mortar should I use?
Masonry mortar M-5 or higher, as specified in the project.
What is the difference from a hollow brick?
The perforated brick has vertical holes, more mass and strength; the hollow brick is lighter and meant for partitions.
How is it delivered?
On a full pallet of under 1,000 kg, delivered by truck.
