A hose that stands up to workshop use and connects instantly. Cheap hoses crack, kink and lose air within a few months. This rubber compressed air hose is flexible and resistant to abrasion and pressure, with a 6 mm internal and 12 mm external diameter and a universal quick coupler already fitted: take it out of the box and connect it.
Available in 10 and 20 metres, it withstands up to 20 bar and the rubber stays easy to handle, so it is simple to roll out and coil up. It is the versatile hose for blowing, inflating, painting and nailers in workshops, garages and building sites, and a direct replacement for the worn hose on your portable compressor or hose reel.
Advantages
Flexible rubber: easy to handle, resistant to abrasion and pressure.
Up to 20 bar: plenty of headroom for any workshop compressor.
Universal quick coupler fitted: connect and get to work.
Two lengths: 10 m or 20 m.
What it is for
Blowing, tyre inflation and cleaning with air.
Spray guns, staplers and nailers.
Workshops, garages and building sites with a portable or fixed compressor.
Technical specifications
Material: rubber
Diameter: 6 x 12 mm
Pressure: 20 bar
Length: 10 m · 20 m
Connection: universal quick coupler
Vetonek tip
Unroll the whole hose before working and do not drive vehicles over it: when crushed, it loses flow and gets damaged. For high-consumption tools and long runs, a hose with an 8 mm internal diameter is a better choice.
Frequently asked questions
Is it suitable for an impact wrench?
For high consumption and long hoses, an internal diameter of 8 mm or more is better.
What coupler does it have?
A universal-profile quick coupler.
What pressure can it withstand?
Up to 20 bar, well above the usual pressure of workshop compressors.
10 or 20 metres?
10 m for a garage or fixed workstation; 20 m if you need to move around a vehicle or work far from the compressor.
What do I need on the tool?
A universal-profile male quick connector, the most common on air tools.
Frequently Asked Questions
Is it suitable for an impact wrench?
For high consumption and long hoses, an internal diameter of 8 mm or more is better.
What coupler does it have?
A universal-profile quick coupler.
What pressure can it withstand?
Up to 20 bar, well above the usual pressure of workshop compressors.
10 or 20 metres?
10 m for a garage or fixed workstation; 20 m if you need to move around a vehicle or work far from the compressor.
What do I need on the tool?
A universal-profile male quick connector, the most common on air tools.
Todo excelente. Tras una primera equivocación con el producto elegido, el equipo de atención al cliente se puedo a trabajar para solucionar el problema y darme una solución adecuada.
