Take compressed air up to 50 metres from the compressor with a hose that does not give up. On building sites, in industrial units or on farms, the compressor is rarely where the work is. This 50-metre roll of 8x14 mm polyurethane hose is resistant to abrasion and pressure, for industrial and home use: it withstands up to 20 bar of working pressure and extreme cold and heat.
It is lead- and cadmium-free, and its 8 mm internal diameter delivers a good flow for most air tools. You can use the whole roll or cut it to length to make up several hoses with their quick connectors, and buying by the roll works out much cheaper than buying each hose separately.
Advantages
50 metres: reach far without moving the compressor.
Polyurethane: abrasion-resistant and flexible in both cold and heat.
Up to 20 bar: plenty of headroom for workshop and industrial compressors.
Lead- and cadmium-free: a safer material.
Cut to length: make up the hoses you need.
What it is for
Building sites, industrial units and farms where the compressor is far away.
Making up several custom-length hoses for the workshop.
Temporary compressed air installations.
Technical specifications
Material: lead- and cadmium-free polyurethane
Diameter: 8 x 14 mm
Length: 50 m
Working pressure: up to 20 bar
Supplied as: roll
Vetonek tip
To fit the ends, use 8 mm hose tail connectors with clamps. Cut the hose with a pipe cutter or a very sharp blade, always at 90°, so the hose tail seats properly and there are no leaks.
Frequently asked questions
What pressure can it withstand?
Up to 20 bar working pressure.
Can I cut it?
Yes, you can cut it to the length you need.
Does it come with connectors?
No, it is supplied as a roll. Fit quick couplers or quick connectors with an 8 mm hose tail and a clamp at each end.
Will I lose pressure over 50 metres?
There is always some loss over long runs; the 8 mm internal diameter reduces it compared with narrower hoses.
Is it suitable for outdoor use?
Yes, polyurethane resists abrasion and withstands extreme cold and heat.
Frequently Asked Questions
What pressure can it withstand?
Up to 20 bar working pressure.
Can I cut it?
Yes, you can cut it to the length you need.
Does it come with connectors?
No, it is supplied as a roll. Fit quick couplers or quick connectors with an 8 mm hose tail and a clamp at each end.
Will I lose pressure over 50 metres?
There is always some loss over long runs; the 8 mm internal diameter reduces it compared with narrower hoses.
Is it suitable for outdoor use?
Yes, polyurethane resists abrasion and withstands extreme cold and heat.
Todo excelente. Tras una primera equivocación con el producto elegido, el equipo de atención al cliente se puedo a trabajar para solucionar el problema y darme una solución adecuada.
