Revitalizing soils x3 | Dolomita calp + plaster + volcanic lava
¿Cuanto material necesitas?
¿Cuanto material necesitas?
How much stone do I need?
How much stone do I need for the ground?
For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.
For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.
For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm
How much stone do I need to fill a gabion?
Density of ± 1,650kg by 1m³.
The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.
Clarifications
ATTENTION!
Granulometries are sizes of sizes
Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.
Broken stones
On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.
In the photos you can see, only real products are seen, broken pieces have been removed.
Dust and sand in products
This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.
Revitalizing soils x3 | Dolomita calp + plaster + volcanic lava
Revitalizer X3 soils
Product description: The "revitalizing soils X3" is an enriching and powerful mixture designed for the integral improvement of agricultural land. This unique amendment combines the dolomite cal, agricultural plaster and volcanic lava flour, providing an optimal balance between nutrients and structural improvements for the soil.
Composition:
- Dolomita cal
- Agricultural plaster
- Volcanic lava flour
Key benefits:
- Complete nutritional improvement: The combination provides a balanced contribution of calcium, magnesium and sulfate, in addition to the rich minerals of volcanic lava, including silicon, iron and other trace elements.
- Soil structure: Improves aeration and drainage, especially in heavy and clay soils.
- PH regulation: Dolomite cal and plaster help neutralize acid soils.
- Microbial vitality: Volcanic lava flour encourages biological activity, increasing soil biodiversity.
- Pest resistance and diseases: The silicon of volcanic lava strengthens plants against diseases and pests.
Recommended applications:
- Ideal for all types of crops, especially vineyards, orchards and gardens.
- Very effective in soils that require improvements in their structure and nutritional balance.
- Adequate for the revitalization of impoverished soils.
Use and application:
- General dose: Apply between 3-6 kg per 100 m², depending on the needs of the soil.
- Application: Distribute evenly on the ground surface and then incorporate slightly by tillage or plow.
Available presentations:
- Big Bag of 1,000 liters
- 15 liter bag
Important:
- For professional use soils, consultation with a soil expert to adjust the specific application is recommended.
- Ideal as a long -term solution to improve soil quality and health.