Touch-up spray gun with 125 cc cup

24,50 €
24,50 € 25,00 €
You save 2% (0,50 €)

Delivery in 3–15 days

Tax included. Shipping calculated at checkout.
Packaging

Touch-up spray gun with 125 cc cup

For a touch-up you do not need to fill a 600 cc gun or waste paint. This touch-up spray gun is ultralight and precise: ideal for small body repairs, frames, mouldings, small parts or blending, where detail matters most.

It has a 125 cc plastic top cup, a 0.8 mm nozzle and a stainless steel needle, with paint flow adjustment to dispense exactly what you need. Its universal quick-coupler connection gets it ready in seconds on any workshop hose.

✅ Key benefits

  • 0.8 mm nozzle: fine atomisation for touch-ups and blending.
  • 125 cc cup: you load just what you need and make the most of the paint.
  • Ultralight: total control in detail work.
  • Flow adjustment: you adjust the amount of paint to each part.
  • Stainless steel needle: resistant to solvents and easy to clean.

🏗️ What it is for

  • Body and paint touch-ups on vehicles.
  • Painting frames, mouldings and small parts.
  • Blending and decorative work.
  • Modelling, restoration and detail work.

📋 Technical specifications

  • Type: gravity, top cup
  • Capacity: 125 cc
  • Cup material: plastic
  • Nozzle: 0.8 mm
  • Needle: stainless steel
  • Adjustment: paint flow
  • Connection: universal with quick coupler

💡 Vetonek tip: work with low pressure and close to the part; for bodywork touch-ups, blend the edges with short passes and let each coat dry. When you finish, run clean solvent through so that the 0.8 mm nozzle does not clog.

Frequently asked questions

Can it be used to paint a whole door?

It is not ideal: with 125 cc it is designed for touch-ups; for large surfaces use a gun of 600 cc or more.

What compressor do I need?

It uses little air: almost any workshop compressor with a regulator will do.

What nozzle does it have?

A 0.8 mm nozzle, designed for fine atomisation and detail work.

How is it connected?

With a universal quick-coupler connection, the same as most workshop hoses use.

What products can I apply?

Paints, varnishes and lacquers that are runny or thinned according to the manufacturer; with a fine nozzle, thick products must be thinned.

Frequently Asked Questions

Can it be used to paint a whole door?

It is not ideal: with 125 cc it is designed for touch-ups; for large surfaces use a gun of 600 cc or more.

What compressor do I need?

It uses little air: almost any workshop compressor with a regulator will do.

What nozzle does it have?

A 0.8 mm nozzle, designed for fine atomisation and detail work.

How is it connected?

With a universal quick-coupler connection, the same as most workshop hoses use.

What products can I apply?

Paints, varnishes and lacquers that are runny or thinned according to the manufacturer; with a fine nozzle, thick products must be thinned.