Skip to product information
  • Pistola de arenado neumática Vica Work - Vetonek
  • Pistola de arenado neumática Vica Work - Vetonek

Sandblasting and shot blasting gun with suction hose

37,24 €
37,24 € 38,00 €
You save 2% (0,76 €)

Delivery in 3–15 days

Tax included. Shipping calculated at checkout.
Packaging

Sandblasting and shot blasting gun with suction hose

Rust, old paint, limescale or chemical residue: some dirt cannot be removed properly with a brush or sandpaper. With this sandblasting and shot blasting gun you remove it with a jet of sand or grit and leave the surface clean and keyed, ready for painting or treatment.

Its cast aluminium body is tough and lightweight, and the 1 m rubber hose draws the abrasive straight from the bag or container, with no hoppers or tanks. It includes two interchangeable nozzles to adjust the jet to each job and works at up to 10 bar.

✅ Key benefits

  • Suction system: draws the abrasive straight from the bag or container.
  • Cast aluminium body: wear-resistant and lightweight.
  • 2 interchangeable nozzles: more concentrated or wider jet.
  • Up to 10 bar: cleaning power for metal and stone.
  • Quick coupler: connects to the compressor hose instantly.

🏗️ What it is for

  • Removing rust from iron, sheet metal and metal parts.
  • Stripping old paint from gates, parts and machinery.
  • Cleaning stone, limescale and chemical residue.
  • Restoring vehicle, motorbike and tool parts.

📋 Technical specifications

  • Body: cast aluminium
  • Maximum pressure: 10 bar
  • Suction hose: rubber, 1 m
  • Nozzles: 2 interchangeable
  • Connection: quick coupler
  • Abrasive: dry sand or grit

💡 Vetonek tip: use dry, well-sieved abrasive and fit a water filter in the line: with moisture, the sand clumps and the gun clogs. A face shield or mask, gloves and respiratory protection are essential, and work in a ventilated space.

Frequently asked questions

What compressor do I need?

Sandblasting uses a lot of air: the more air flow and the bigger the tank, the more continuous the jet will be.

What abrasive should I use?

Dry, fine sand or grit suitable for blasting.

How does it load the abrasive?

By suction: put the 1 m hose into the bag or container and the gun draws in the abrasive when you pull the trigger.

What is the maximum pressure it takes?

Up to 10 bar.

What protection do I need?

A mask or face shield, respiratory protection, gloves and clothing that covers the skin: the abrasive rebounds with force.

Frequently Asked Questions

What compressor do I need?

Sandblasting uses a lot of air: the more air flow and the bigger the tank, the more continuous the jet will be.

What abrasive should I use?

Dry, fine sand or grit suitable for blasting.

How does it load the abrasive?

By suction: put the 1 m hose into the bag or container and the gun draws in the abrasive when you pull the trigger.

What is the maximum pressure it takes?

Up to 10 bar.

What protection do I need?

A mask or face shield, respiratory protection, gloves and clothing that covers the skin: the abrasive rebounds with force.