Skip to product information
  • Esquina de alero con Placa Esquina Hormilla
  • Placa Esquina Hormilla imitación madera
  • Esquina de alero con Placa Esquina Hormilla
  • Placa Esquina Hormilla imitación madera

Placa Esquina Hormilla - Wood-effect concrete corner piece

32,19 €
32,19 €

Delivery in 3–15 days

Tax included. Shipping calculated at checkout.
Tamaño
Envase
Color

Placa Esquina Hormilla - Wood-effect concrete corner piece

Placa Esquina Hormilla: the eaves corner, solved at the factory

The corner is where eaves cladding gives itself away: two mitre cuts that never quite close. The Placa Esquina Hormilla arrives with the angle already formed, in wood-textured concrete and a 3.5 × 40 × 100 cm format, so the eaves can turn the corner with the same continuous grain.

✅ Key advantages

  • Factory-formed angle: no mitre cuts on site, so the corner is closed and aligned.
  • Two finishes: Oregón wood-effect and Gris, to match the rest of the system or modern façades.
  • Zero maintenance: no woodworm, no rot, no repainting.
  • Pairs with the panel and the corbels: the complete eaves system in decorative concrete.
  • Full pallet at a lower price: 30 units with a better price per piece.

🏗️ Recommended applications

  • Corners of eaves clad with wood-effect panels
  • Corners of slab edges
  • Finishing details for porches and canopies

📋 Technical data sheet

  • Material: decorative concrete with wood texture
  • Dimensions: 3.5 × 40 × 100 cm
  • Weight per piece: 30 kg
  • Pallet: 30 units (≈ 925 kg)
  • Colors: Oregón and Gris
  • Use: indoor and outdoor

🧰 Installation

  1. Start laying out the eaves from the corners and work towards the center with the flat panel.
  2. Bed with high-strength mortar or use mechanical anchoring, depending on the substrate.
  3. Prop in place until fully set and check the alignment of the two planes.

💡 Professional tip: install the four corners first, level with one another, and stretch a string line between them: the rest of the cladding lines up by itself.

Frequently Asked Questions

¿Para qué sirve esta pieza?

Para resolver las esquinas de los aleros y frentes de forjado forrados con placa imitación madera, sin cortes a inglete en obra.

¿En qué colores está?

En Oregón imitación madera, a juego con canecillos y placas, y en Gris para fachadas actuales.

¿Cómo se coloca?

Primero las esquinas, a nivel entre sí, y después el resto del forrado alineado con cordel. Se recibe con mortero de alta resistencia o anclaje mecánico.

¿Necesita mantenimiento?

No. Ni barniz ni tratamientos: es hormigón, no se pudre ni pierde el color.

¿Se puede cortar?

Sí, con radial y disco de diamante, para ajustar el largo al vuelo del alero.

¿Aguanta heladas y lluvia?

Sí, es una pieza hidrofugada para exterior permanente.