All the character of cobblestone paving with the thickness of a tile. The slice is made by sawing the cobble top and bottom, leaving a 3 cm thick piece with two flat faces: it is laid as a covering over a slab, with little build-up height, and leaves a flat, multicoloured surface that reveals the inside of the stone.
Benefits
Only 3 cm thick: little build-up height, ideal for renovating an existing slab or terrace.
Two flat faces: it sits stably and leaves a smooth surface that is comfortable to walk on.
Natural multicolour: a blend of cobbles from several stones that reveals the inside of each one.
Excellent coverage: about 18 m² per crate at only 65 kg/m².
Natural stone: no pigments or coatings to wear off.
Shipping included in the price: crates of up to 1,200 kg with transport included in the price.
Uses
Natural stone paving for private customers and for projects by architects, local councils and landscapers:
Terraces, patios and porches over an existing slab
Walkways and pedestrian areas
Renovation of floors with limited height available
Bands and borders combined with cobblestone paving
The sawn cobblestone slice is the low-thickness version: sawn top and bottom, it is laid as a covering over an existing slab, on terraces, patios, porches or pedestrian areas where there is no height for full pebble paving. For vehicle traffic or new-build pebble paving, choose full-height sawn cobblestones.
Models
Model
Stone and colour
Size
kg/m²
m² per crate
Price/m² (VAT incl.)
Multicolour
Blend of cobbles from several natural stones, multicolour
Thickness 3 cm
65
18
€56.51
Installation and tips
Start from a sound, clean, level concrete slab with a fall to drain water.
Bond the slices with mortar or cementitious adhesive for outdoor use, spread with a notched trowel.
Bed each piece with a rubber mallet and check flatness with a straightedge.
Fill the joints with mortar and clean the surface with a damp sponge before it sets.
Vetonek tip: first check that the slab is clean, sound and has a fall to drain water. Spread the adhesive or mortar with a notched trowel on the slab and also on the underside of large pieces, and mix slices from different parts of the crate to spread the colours.
Format and shipping
Sold by the crate of about 18 m² (around 1,170 kg).
Shipping is included in the price.
Unloading at the destination must be done with mechanical equipment (forklift, crane or loader), as the crate weighs over a tonne.
The price per m² is shown as a reference.
Frequently asked questions
How are the slices laid?
On a sound, clean concrete slab with a fall, bonded with mortar or cementitious adhesive for outdoor use, like a covering. The joints are then filled with mortar and the surface is cleaned before it hardens.
How many m² and kilos are in the crate?
The crate holds about 18 m² and weighs around 1,170 kg, with an approximate consumption of 65 kg per m².
How many m² do I need?
Measure the length by the width of each area, add up the areas and add 5-10 % for cuts and piece selection. Divide the total by the m² per crate and round up.
What is the difference from sawn cobblestones for pebble paving?
Sawn cobblestones keep their full height and are set into a mortar bed like new-build pebble paving; the slice is sawn on both faces, is 3 cm thick and is bonded onto a slab like a tile. From above they look very similar.
Is it suitable for cars?
It is designed for pedestrian use: terraces, patios, porches and walkways. For driveways, full-height sawn or split cobblestone paving on a concrete slab is a better choice.
Can it be used outdoors in frost?
It is natural stone suitable for outdoor use. In frost-prone areas, installation is decisive: a slab with a fall, mortar or adhesive for outdoor use, well-filled joints and no voids under the pieces where water can collect.
What joint does it need?
A mortar joint, from a few millimetres to 1 cm depending on the look you want. Fill it well and remove the excess from the surface with a damp sponge before it sets.
Why does each piece have a different colour?
It is a blend of cobbles from several natural stones, and each cobble has its own colour and veining. That variation is part of its charm: mix pieces from different parts of the crate when laying for an even spread.
Frequently Asked Questions
How are the slices laid?
On a sound, clean concrete slab with a fall, bonded with mortar or cementitious adhesive for outdoor use, like a covering. The joints are then filled with mortar and the surface is cleaned before it hardens.
How many m² and kilos are in the crate?
The crate holds about 18 m² and weighs around 1,170 kg, with an approximate consumption of 65 kg per m².
How many m² do I need?
Measure the length by the width of each area, add up the areas and add 5-10 % for cuts and piece selection. Divide the total by the m² per crate and round up.
What is the difference from sawn cobblestones for pebble paving?
Sawn cobblestones keep their full height and are set into a mortar bed like new-build pebble paving; the slice is sawn on both faces, is 3 cm thick and is bonded onto a slab like a tile. From above they look very similar.
Is it suitable for cars?
It is designed for pedestrian use: terraces, patios, porches and walkways. For driveways, full-height sawn or split cobblestone paving on a concrete slab is a better choice.
Can it be used outdoors in frost?
It is natural stone suitable for outdoor use. In frost-prone areas, installation is decisive: a slab with a fall, mortar or adhesive for outdoor use, well-filled joints and no voids under the pieces where water can collect.
What joint does it need?
A mortar joint, from a few millimetres to 1 cm depending on the look you want. Fill it well and remove the excess from the surface with a damp sponge before it sets.
Why does each piece have a different colour?
It is a blend of cobbles from several natural stones, and each cobble has its own colour and veining. That variation is part of its charm: mix pieces from different parts of the crate when laying for an even spread.
Todo excelente. Tras una primera equivocación con el producto elegido, el equipo de atención al cliente se puedo a trabajar para solucionar el problema y darme una solución adecuada.
