Skip to product information
  • Plato de goma 150 mm para lijadora Vica Work - Vetonek
  • Plato de goma 150 mm para lijadora Vica Work - Vetonek

150 mm rubber backing pad for air sander

34,30 €
34,30 € 35,00 €
You save 2% (0,70 €)

Delivery in 3–15 days

Tax included. Shipping calculated at checkout.
Packaging

150 mm rubber backing pad for air sander

When the sander pad warps or the hook-and-loop stops gripping, the sanding disc wobbles, comes loose and leaves marks. This 150 mm rubber backing pad gives your random orbital sander back a firm, well-cushioned support, with a good grip on the sanding disc, so it sands like new again.

It is the replacement pad for 150 mm random orbital sanders, such as the CP31-400 and CP31-401 models. Made of tough rubber, it is suitable for woodworking, metal and car restoration. Replacing it costs much less than a new sander.

Before fitting it, clean the sander spindle and check that the pad is properly centred and tightened: an off-centre pad vibrates, tires your hand and wears out the bearings.

✅ Key benefits

  • Revives your sander: replaces a worn or warped pad in minutes.
  • Tough rubber: good cushioning and long life.
  • Good disc grip: the sanding disc does not come loose or go off-centre.
  • 150 mm: the standard diameter for workshop random orbital sanders.
  • Savings: extends the life of your sander without buying another.

🏗️ What it is for

  • Replacing the pad on 150 mm random orbital sanders.
  • Sanding wood in carpentry and cabinetmaking.
  • Preparing metal and car bodies before painting.
  • Car and furniture restoration.

📋 Technical specifications

  • Diameter: 150 mm
  • Material: tough rubber
  • Compatible with: 150 mm random orbital sanders, models CP31-400 / CP31-401
  • Use: woodworking, metal and car restoration

💡 Vetonek tip: use sanding discs of the same diameter and well centred; clean it with a damp cloth and avoid aggressive solvents. Do not rest the running sander on the bare pad: the hook-and-loop wears out in seconds.

Frequently asked questions

Is it suitable for my sander?

It is if your sander is 150 mm and the fitting matches the CP31-400 / CP31-401 models; contact us if in doubt.

When should I replace it?

When the disc no longer grips well or the rubber is warped.

What diameter is it?

150 mm.

What material is it made of?

Tough rubber, with good cushioning and sanding disc grip.

How do I maintain it?

Clean it with a damp cloth, avoid aggressive solvents and do not run it without a sanding disc.

Frequently Asked Questions

Is it suitable for my sander?

It is if your sander is 150 mm and the fitting matches the CP31-400 / CP31-401 models; contact us if in doubt.

When should I replace it?

When the disc no longer grips well or the rubber is warped.

What diameter is it?

150 mm.

What material is it made of?

Tough rubber, with good cushioning and sanding disc grip.

How do I maintain it?

Clean it with a damp cloth, avoid aggressive solvents and do not run it without a sanding disc.