Skip to product information

      Sanding pad for long-reach wall sander

      8,57 €
      8,57 € 8,75 €
      You save 2% (0,18 €)

      Delivery in 3–15 days

      Tax included. Shipping calculated at checkout.
      Model

      Sanding pad for long-reach wall sander

      Your drywall sander grips the sanding disc like new again. Replacement sanding pad for the CP31-800LED and CP31-900BS long-reach wall sanders. When the pad's hook and loop wears out, the discs stop holding, fly off or burn: replacing the pad restores the machine's full performance.

      It is a simple spare part that saves you replacing the whole sander and lets you keep sanding walls and ceilings with an even finish.

      Key benefits

      • Dedicated spare part: for CP31-800LED or CP31-900BS.
      • Grip restored: the discs are held firmly again.
      • Fewer wasted discs: healthy hook and loop stops the abrasive from burning.
      • Savings: extends the life of the sander without replacing the machine.

      What it's for

      • Replacing a pad with worn or damaged hook and loop.
      • Sanding plasterboard, plaster and filler on walls and ceilings.
      • Maintenance of long-reach drywall sanders in painting companies.

      How to change the pad

      Unplug the sander, remove the sanding disc and take off the worn pad. Fit the new one, tighten it well and check that it runs true before fitting a new disc. A pad in good condition spreads the pressure evenly and avoids marks on the wall. Inspect the pad from time to time to spot wear early.

      Technical specifications

      • Type: replacement sanding pad
      • Compatibility: CP31-800LED · CP31-900BS (choose yours)
      • References: CP31-800-3 · CP31-900BS-3

      Vetonek tip: never sand with the pad bare: the hook and loop is destroyed in seconds when it rubs against the wall. And always connect the sander to a vacuum so dust does not build up on the pad.

      Frequently asked questions

      Which pad do I need?

      The one that matches your sander model: CP31-800LED or CP31-900BS.

      When should it be replaced?

      When the hook and loop no longer holds the discs or the pad is damaged.

      Why does the hook and loop wear out?

      Because of heat and friction, especially if you sand without a disc or with very worn discs.

      Is it suitable for other sanders?

      It is intended for the CP31-800LED and CP31-900BS long-reach sanders.

      What should I check when fitting it?

      That it is firmly fixed and centred, and that the sanding disc adheres fully to the hook and loop.

      Frequently Asked Questions

      Which pad do I need?

      The one that matches your sander model: CP31-800LED or CP31-900BS.

      When should it be replaced?

      When the hook and loop no longer holds the discs or the pad is damaged.

      Why does the hook and loop wear out?

      Because of heat and friction, especially if you sand without a disc or with very worn discs.

      Is it suitable for other sanders?

      It is intended for the CP31-800LED and CP31-900BS long-reach sanders.

      What should I check when fitting it?

      That it is firmly fixed and centred, and that the sanding disc adheres fully to the hook and loop.