Skip to product information
  • Racor en Y de 3 vías 1/4" Vica Work - Vetonek
  • Racor en Y de 3 vías 1/4" Vica Work - Vetonek

3-way Y fitting 1/4" with 1 male and 2 female

4,75 €
4,75 € 4,85 €
You save 2% (0,10 €)

Delivery in 3–15 days

Tax included. Shipping calculated at checkout.
Packaging

3-way Y fitting 1/4" with 1 male and 2 female

Double your compressor's air outlets without touching the installation. Having only one outlet means disconnecting one tool every time you want to use another, or sharing a hose between two people. This three-way branch fitting, with 1 male and 2 female 1/4" threads, takes two air outlets from a single outlet: for example, to use two tools or to fit two quick couplers.

It screws directly into the outlet of the compressor, the regulator or a network outlet, and you fit the couplers or accessories you need into its two female threads. A small, inexpensive and very practical solution for workshops, garages and workstations where more than one air tool is used.

Advantages

  • Two outlets from one: more outlets without modifying the installation.
  • 1 male + 2 female: screws into the outlet and accepts two accessories.
  • 1/4" thread: the most common size on workshop compressors.
  • Compact: takes up very little space.

What it is for

  • Fitting two quick couplers to the compressor outlet.
  • Working with two tools or two operators at the same time.
  • Taking off a separate outlet for the pressure gauge or an auxiliary accessory.

Technical specifications

  • Ways: 3 (1 male + 2 female)
  • Thread: 1/4"
  • Shape: Y
  • Use: compressed air
  • Model: CA-485

Vetonek tip

Before doubling up outlets, check that your compressor delivers enough flow for both tools at once: if not, the pressure will drop on both. Seal the male thread with PTFE tape and fit a quick coupler to each female thread.

Frequently asked questions

Do I need to use PTFE tape?

Yes, apply PTFE tape or thread sealant to tapered male threads to prevent leaks.

Can I use two tools at the same time?

Yes, as long as the compressor delivers enough flow for both.

What thread size does it have?

All three ways are 1/4": one male for the outlet and two female for the accessories.

What do I fit on the outlets?

Usually two quick couplers with a 1/4" male thread, although you can fit any accessory of that size.

What if my outlet is a different size?

You can adapt it with a threaded reducer or a reducing hex nipple of the right size.

Frequently Asked Questions

Do I need to use PTFE tape?

Yes, apply PTFE tape or thread sealant to tapered male threads to prevent leaks.

Can I use two tools at the same time?

Yes, as long as the compressor delivers enough flow for both.

What thread size does it have?

All three ways are 1/4": one male for the outlet and two female for the accessories.

What do I fit on the outlets?

Usually two quick couplers with a 1/4" male thread, although you can fit any accessory of that size.

What if my outlet is a different size?

You can adapt it with a threaded reducer or a reducing hex nipple of the right size.