Pressure regulator with gauge and quick coupler

14,70 €
14,70 € 15,00 €
You save 2% (0,30 €)

Delivery in 3–15 days

Tax included. Shipping calculated at checkout.
Packaging

Pressure regulator with gauge and quick coupler

The exact pressure, right at the tool. A 0 to 12 bar regulator with direct-reading gauge and 1/4" universal female quick coupler. You set the pressure at the point of use, regardless of hose length or what other outlets are consuming.

Very useful for spray guns, nailers and pressure-sensitive tools, where one bar more or less changes the result.

Key benefits

  • Adjustment at the point of use: precise pressure at the tool.
  • Pressure gauge: real-time reading.
  • 1/4" quick coupler: universal female connection.
  • Compact: fits between hose and tool.

What it is for

  • Spray guns and airbrushes.
  • Pneumatic nailers and staplers.
  • Tools that need a specific pressure.

How to use it

Connect the regulator to the tool inlet or the hose outlet, run the tool and turn the knob until the gauge shows the pressure recommended by the tool manufacturer. For painting, set the pressure and do a test pass on a piece of cardboard before you start: you will see straight away whether the atomisation is right. Check the gauge again if you change hose or tool. Correct adjustment saves air, material and touch-ups.

Technical features

  • Adjustment range: 0-12 bar
  • Pressure gauge: yes, real-time reading
  • Connection: 1/4" universal female quick coupler
  • Reference: CA-970PRO

Vetonek tip: set the pressure with the tool connected and running, not with no flow: that way you see the actual working pressure. For painting, adjust and do a test pass before you start.

Frequently asked questions

Where is it fitted?

Between the hose and the tool, or at the compressor outlet.

What is it for if the compressor already has a regulator?

To set the pressure at the point of use, regardless of hose length or other air consumers.

What pressure range does it have?

From 0 to 12 bar.

What connection does it have?

1/4" universal female quick coupler.

Which tools is it useful for?

Above all for spray guns, nailers and pressure-sensitive tools.

Frequently Asked Questions

Where is it fitted?

Between the hose and the tool, or at the compressor outlet.

What is it for if the compressor already has a regulator?

To set the pressure at the point of use, regardless of hose length or other air consumers.

What pressure range does it have?

From 0 to 12 bar.

What connection does it have?

1/4" universal female quick coupler.

Which tools is it useful for?

Above all for spray guns, nailers and pressure-sensitive tools.