Ribaforada Cladding - Smooth-Surface Reconstituted Stone
Ribaforada Cladding: serene stone for contemporary spaces
Not every wall calls for texture: many projects look for a calm, fine-grained stone that adds warmth without stealing the show. Ribaforada Cladding is that stone: 40 × 60 × 2 cm panels in Crudo, with a fine, barely-there texture and integral water-repellent treatment throughout.
✅ Main advantages
Smooth, uniform surface: the elegant choice for contemporary interiors, spas and minimalist façades.
Large 40 × 60 format: 4.16 pieces per m² and fewer joints.
Warm Crudo tone: pairs well with light wood, white and natural textiles.
Integral water-repellent treatment: indoor and outdoor use, rain and frost.
Matching trims and corner pieces to finish openings, string courses and angles.
🏗️ Recommended applications
Living rooms, bedrooms and headboard walls
Spas, bathrooms (dry areas) and entrance halls
Clean-lined façades and porches
Hotels and venues with a serene aesthetic
📋 Technical specifications
Material: reconstituted stone (concrete with integral water-repellent treatment)
Format: 40 × 60 × 2 cm · 4.16 pieces/m² (1 cm joint)
Weight: 48 kg/m²
Color: Crudo
Pack: 0.5 m² (2 pieces) · Full pallet: 20 m²
Use: indoor and outdoor
🧰 Installation
Clean, firm and level substrate.
Flexible C2T cement adhesive, double-buttered.
Work from the bottom up, with a 1 cm joint, in a staggered (running bond) pattern.
Grout with light-colored mortar and clean with a damp sponge.
💡 Pro tip: on smooth-surface stone, raking light exposes any panel that is out of plumb. Check the plane with a 2 m straightedge every few courses: what a rustic stone would hide, shows up here.
Frequently Asked Questions
¿Cuántas piezas necesito por m²?
4,16 piezas por m² con junta de 1 cm. Añade un 10 % para cortes.
¿Cuánto trae el palet?
20 m² por palet completo, la compra más económica por m².
¿Vale para exterior?
Sí. Hidrofugado en masa, resiste lluvia y heladas.
¿Qué textura tiene?
Suave y uniforme, con un grano fino apenas insinuado: piedra tranquila para espacios actuales.
¿Sirve para baños o spas?
Sí, en zonas secas y húmedas sin chorro directo de agua; en duchas conviene sellar con hidrofugante.
¿Con qué se pega?
Con cemento cola flexible C2T a doble encolado, llana de 8/10 mm.
¿Hay piezas de remate?
Sí: moldura, esquinas de aplacado y ángulos de moldura en el mismo tono Crudo.
¿El tono varía entre partidas?
Ligeramente, al llevar pigmento mineral. Compra todo de una vez y mezcla placas de varias cajas.
