Highly effective release agent for all types of formwork, especially absorbent. It significantly reduces the adhesion between concrete or mortar and the formwork surface, facilitating demolding and minimizing damage. It offers compatibility with different formwork materials and improves the quality of the surface finish without leaving visible residue.
Apps and features
Release agent in oil format for wood, metal and plastic formwork, with special effectiveness on absorbent surfaces.
Prevents adhesion between concrete or mortar and the formwork, favoring quick and clean removal of molds.
Easy application by brush, roller or spray; It is distributed evenly for a homogeneous release layer.
Compatibility with a wide range of formwork materials and common working conditions on site.
It helps reduce damage to molds and extend the useful life of formwork thanks to its lubricating action.
It dries in a controlled manner and does not leave significant residues on the surface of the formwork or on the removed concrete.
Frequently asked questions about Sika products (mortars, adhesives and sealants)
How do I know which size and quantity to buy?
Each product page includes the approximate yield or consumption (for example kg/m² or metres of bead per cartridge) in the "Technical specifications" section. Calculate the surface area or thickness of your project and multiply by that consumption to find out how many units you need. If in doubt, contact us with the measurements of your job.
Where can I find the complete technical data sheet (Product Data Sheet)?
The description of each product already includes the main technical data (strengths, setting times, application temperature, applicable standards, etc.), taken from the official Sika Spain Product Data Sheet. If you need the complete PDF data sheet or the safety data sheet (SDS), write to us and we will send it to you.
Do these products comply with European regulations (CE marking)?
Most Sika products carry the CE marking in accordance with the relevant European standard (for example EN 1504 for structural repair, EN 12004 for tile adhesives, EN 13888 for grouts or EN 15651 for sealants). The exact standard for each reference is detailed in the "Standards and certificates" section of its product page.
What protective equipment do I need to apply them?
It depends on the product: cement-based mortars and adhesives are usually irritating to skin and eyes (gloves, goggles and a mask are recommended), while polyurethane sealants and adhesives require good ventilation. Always check the safety section of the product page and its safety data sheet (SDS) before use.
How should I store these products and how long do they last unopened?
Shelf life and storage conditions (temperature, humidity, protection from light) vary depending on the type of product (cementitious, polyurethane, epoxy, etc.) and are stated on the packaging and in the data sheet of each reference. In general, it is advisable to store in a dry place, protected from frost and direct sunlight.
Can I return a Sika product if I haven't used it?
Yes, you have 14 calendar days from receipt to exercise your right of withdrawal, provided the product is in its original packaging and has not been opened. The cost of return shipping is borne by the customer. Contact us at info@vetonek.com or via WhatsApp on +34 629 571 735.
How long does my order take to arrive?
We ship to mainland Spain, the Balearic Islands, Portugal and the other European countries we serve (France, Belgium, the Netherlands, Germany, Italy, etc.). The estimated delivery time is 3 to 9 working days (no shipping to the Canary Islands, Ceuta or Melilla).
