SikaCeram®-260 Flexible is a resin-enhanced, flexible, high-performance cementitious adhesive for laying ceramic pieces in a thin layer. Meet the classification C2TES2, offers high adhesion, elasticity against movements and excellent performance in narrow joints. For its use, water must be added, facilitating consistent dosage and application.
Apps and features
High-adhesion cementitious adhesive for laying ceramics in a thin layer.
Product class: C2TES2 according to EN 12004 regulations.
FLEXIBILITY and tolerance to structural movements thanks to the resin formulation.
Simple preparation and mixing: add water to obtain the right consistency.
Stable performance on interior floors and walls; Suitable for porcelain and ceramic tiles.
Good performance in conditions of moderate humidity and thermal variations.
Frequently asked questions
What does class S2 mean for SikaCeram-260 Flexible?
It is the most demanding deformability class: a transverse deformation of at least 5 mm, twice that of an S1. It allows you to work on substrates that move, such as wooden floors, sheet metal, young screeds or floors with large temperature swings.
How much working time does it have?
Both the pot life and the open time are approximately 1 hour at +20 °C. The adjustment time, however, is about 10 minutes, so once the tile is placed there is little room to move it.
Which tiles and uses is it suitable for?
For very large-format ceramic on floors and walls, deformable substrates, ceramic over ceramic in renovations, ventilated facades and exterior surfaces exposed to freeze-thaw, as well as natural stone and low-absorption tiles.
How much water does it need and what pack size is available?
It is mixed with 6.0 to 6.6 litres of water per bag, equivalent to 27-30 % of the powder weight. It is sold in a 20 kg bag of white powder. The layer thickness ranges from 3 to 15 mm.
When can it be walked on?
It can be walked on after a minimum of 24 hours and can be put into service after 7 days. It is applied at substrate and ambient temperatures between +5 °C and +35 °C. If you are unsure whether it suits your case, write to us and we will help you.
Frequently asked questions about Sika products (mortars, adhesives and sealants)
How do I know which size and quantity to buy?
Each product page includes the approximate yield or consumption (for example kg/m² or metres of bead per cartridge) in the "Technical specifications" section. Calculate the surface area or thickness of your project and multiply by that consumption to find out how many units you need. If in doubt, contact us with the measurements of your job.
Where can I find the complete technical data sheet (Product Data Sheet)?
The description of each product already includes the main technical data (strengths, setting times, application temperature, applicable standards, etc.), taken from the official Sika Spain Product Data Sheet. If you need the complete PDF data sheet or the safety data sheet (SDS), write to us and we will send it to you.
Do these products comply with European regulations (CE marking)?
Most Sika products carry the CE marking in accordance with the relevant European standard (for example EN 1504 for structural repair, EN 12004 for tile adhesives, EN 13888 for grouts or EN 15651 for sealants). The exact standard for each reference is detailed in the "Standards and certificates" section of its product page.
What protective equipment do I need to apply them?
It depends on the product: cement-based mortars and adhesives are usually irritating to skin and eyes (gloves, goggles and a mask are recommended), while polyurethane sealants and adhesives require good ventilation. Always check the safety section of the product page and its safety data sheet (SDS) before use.
How should I store these products and how long do they last unopened?
Shelf life and storage conditions (temperature, humidity, protection from light) vary depending on the type of product (cementitious, polyurethane, epoxy, etc.) and are stated on the packaging and in the data sheet of each reference. In general, it is advisable to store in a dry place, protected from frost and direct sunlight.
Can I return a Sika product if I haven't used it?
Yes, you have 14 calendar days from receipt to exercise your right of withdrawal, provided the product is in its original packaging and has not been opened. The cost of return shipping is borne by the customer. Contact us at info@vetonek.com or via WhatsApp on +34 629 571 735.
How long does my order take to arrive?
We ship to mainland Spain, the Balearic Islands, Portugal and the other European countries we serve (France, Belgium, the Netherlands, Germany, Italy, etc.). The estimated delivery time is 3 to 9 working days (no shipping to the Canary Islands, Ceuta or Melilla).
Todo excelente. Tras una primera equivocación con el producto elegido, el equipo de atención al cliente se puedo a trabajar para solucionar el problema y darme una solución adecuada.
