Sikagard® P 770 is a two-component primer based on technology Xolutec® that offers a high penetration into the support and acts as an adhesion promoter for Sikagard® and Sikalastic® coatings. Thanks to the reticulated network formed by mixing, it can be adjust crosslink density to adapt performance, with results in different degrees of hardness and flexibility. It is low VOC, quick and easy to apply by spray or by hand, and cures quickly even at low temperatures, reducing application times and allowing rapid return to service. It is insensitive to humidity and tolerates a wide variety of job conditions, expanding the application window and minimizing delays and failures. Long maintenance cycles and low life cycle costs They help reduce the total cost of ownership.
Apps and features
Adhesion promoter for Sikagard® and Sikalastic® coatings and for Sikagard®-7000 CR systems, such as Sikagard® M 790.
Two-component primer based on Xolutec® with cross-linked network (XPN) that improves adhesion and system properties.
Control of cross-linking density to adapt hardness, flexibility and performance according to the substrate and the applied system.
Very low in volatile organic compounds (VOC), with quick and easy application both by spray and by hand.
Fast curing, even at low temperatures, minimizing downtime and accelerating commissioning.
Resistant to humidity and tolerant to variable construction conditions, increasing the application window.
Reduction in costs throughout the life cycle and lower risk of delays or failures in the work due to weather or humidity conditions.
Frequently asked questions about Sika products (mortars, adhesives and sealants)
How do I know which size and quantity to buy?
Each product page includes the approximate yield or consumption (for example kg/m² or metres of bead per cartridge) in the "Technical specifications" section. Calculate the surface area or thickness of your project and multiply by that consumption to find out how many units you need. If in doubt, contact us with the measurements of your job.
Where can I find the complete technical data sheet (Product Data Sheet)?
The description of each product already includes the main technical data (strengths, setting times, application temperature, applicable standards, etc.), taken from the official Sika Spain Product Data Sheet. If you need the complete PDF data sheet or the safety data sheet (SDS), write to us and we will send it to you.
Do these products comply with European regulations (CE marking)?
Most Sika products carry the CE marking in accordance with the relevant European standard (for example EN 1504 for structural repair, EN 12004 for tile adhesives, EN 13888 for grouts or EN 15651 for sealants). The exact standard for each reference is detailed in the "Standards and certificates" section of its product page.
What protective equipment do I need to apply them?
It depends on the product: cement-based mortars and adhesives are usually irritating to skin and eyes (gloves, goggles and a mask are recommended), while polyurethane sealants and adhesives require good ventilation. Always check the safety section of the product page and its safety data sheet (SDS) before use.
How should I store these products and how long do they last unopened?
Shelf life and storage conditions (temperature, humidity, protection from light) vary depending on the type of product (cementitious, polyurethane, epoxy, etc.) and are stated on the packaging and in the data sheet of each reference. In general, it is advisable to store in a dry place, protected from frost and direct sunlight.
Can I return a Sika product if I haven't used it?
Yes, you have 14 calendar days from receipt to exercise your right of withdrawal, provided the product is in its original packaging and has not been opened. The cost of return shipping is borne by the customer. Contact us at info@vetonek.com or via WhatsApp on +34 629 571 735.
How long does my order take to arrive?
We ship to mainland Spain, the Balearic Islands, Portugal and the other European countries we serve (France, Belgium, the Netherlands, Germany, Italy, etc.). The estimated delivery time is 3 to 9 working days (no shipping to the Canary Islands, Ceuta or Melilla).
Todo perfecto
Envío rápido, aunque el transportista se hizonun lío con el bulto, al final la entrega fué perfecta.
Combre grava de río, el diámetro ybel color coinciden con lo ofertado. Venía algo sucia, pero nada del otro mundo.
La relación calidad/precio es inmellorable.
