Skip to product information
  • Soldador multiproceso 3 en 1 130 A Vica Work - Vetonek
  • Soldador multiproceso 3 en 1 130 A Vica Work - Vetonek

130 A 3-in-1 multi-process welder: gasless, stick and TIG, with welding mask

155,82 €
155,82 € 159,00 €
You save 2% (3,18 €)

Delivery in 3–15 days

Tax included. Shipping calculated at checkout.
Packaging

130 A 3-in-1 multi-process welder: gasless, stick and TIG, with welding mask

A 3-in-1 inverter welder that combines gasless (flux-cored) wire, stick and DC TIG Lift, with a simple panel featuring process and amperage selectors and an LCD screen to view the parameters.

It comes complete: quick-connect wire torch, earth clamp, electrode holder, welding mask and brush. It takes spools up to 1 kg with 0.8 to 1.0 mm wire and electrodes from 1.6 to 2.5 mm.

✅ Key benefits

  • 3 processes: gasless wire, stick and DC TIG Lift.
  • Complete kit: torch, clamps, welding mask and brush included.
  • Quick-connect torch: fits and removes in seconds.
  • LCD screen: clear reading of the parameters.
  • No gas cylinder: with flux-cored wire you can weld outdoors too.

🏗️ What it is for

  • DIY and repairs on iron and steel.
  • Maintenance of farms, sheds and agricultural vehicles.
  • TIG Lift welding of steel and stainless steel.
  • Outdoor work where the wind would blow the shielding gas away.

📋 Technical specifications

  • Processes: gasless wire (FCAW), MMA and DC TIG Lift
  • Current: wire 30-130 A · stick 20-130 A · TIG 10-130 A
  • Duty cycle: 130 A at 40 % (40 ºC)
  • Power supply: 230 V, 50-60 Hz
  • Spool: up to 1 kg, Ø 100 mm
  • Flux-cored wire: 0.8-1.0 mm
  • Electrodes: 1.6-2.5 mm (rutile, basic and stainless steel)
  • Protection: IP21S
  • Includes: wire torch, earth clamp, electrode holder, welding mask and brush
  • Weight with packaging: 7.9 kg
  • Package dimensions: 41 x 25.5 x 34 cm

💡 Pro tip: with gasless wire, drag the torch (tilted back, pulling the weld pool) rather than pushing it: the slag stays behind and the bead penetrates better. Always wear a welding helmet or face shield, gloves and protective clothing, and work in a well-ventilated area.

Frequently asked questions

Does it need gas?

Not in wire mode, because it uses self-shielded flux-cored wire. For TIG Lift you will need argon.

What is included?

Wire torch, earth clamp, electrode holder, welding mask and brush.

Which wire does it take?

Flux-cored wire from 0.8 to 1.0 mm on spools up to 1 kg.

Does it run on 230 V?

Yes, it is 230 V single-phase, 50-60 Hz.

Which electrodes does it take?

Rutile, basic and stainless steel electrodes from 1.6 to 2.5 mm.

Frequently Asked Questions

Does it need gas?

Not in wire mode, because it uses self-shielded flux-cored wire. For TIG Lift you will need argon.

What is included?

Wire torch, earth clamp, electrode holder, welding mask and brush.

Which wire does it take?

Flux-cored wire from 0.8 to 1.0 mm on spools up to 1 kg.

Does it run on 230 V?

Yes, it is 230 V single-phase, 50-60 Hz.

Which electrodes does it take?

Rutile, basic and stainless steel electrodes from 1.6 to 2.5 mm.