Skip to product information
  • Soldador multiproceso MIG MMA TIG 160 A Vica Work - Vetonek
  • Soldador multiproceso MIG MMA TIG 160 A Vica Work - Vetonek

160 A MIG, stick and TIG multi-process welder for 5 kg spools

312,62 €
312,62 € 319,00 €
You save 2% (6,38 €)

Delivery in 3–15 days

Tax included. Shipping calculated at checkout.
Packaging

160 A MIG, stick and TIG multi-process welder for 5 kg spools

A 3-in-1 workshop machine that does almost everything: gas-shielded MIG, gasless flux-cored wire, stick and TIG Lift. It runs on 230 V and takes spools up to 5 kg (Ø 200 mm), so you change wire far less often.

The digital display shows amps and volts for precise adjustment. It takes steel (0.6-1.0 mm), aluminium, copper-silicon and flux-cored wire (0.8-1.0 mm) and electrodes from 1.6 to 3.25 mm.

✅ Key benefits

  • 4 ways to weld: gas-shielded MIG, gasless wire, stick and TIG Lift.
  • 5 kg spool: longer run time on long jobs.
  • Digital A/V display: precise setting of amperage and voltage.
  • Several wire types: steel, aluminium, CuSi3 and flux-cored.
  • Portable and robust: for constant use in the workshop or away from it.

🏗️ What it is for

  • Mechanical and body repair shops.
  • Metalwork and metal fabrication.
  • Aluminium welding and MIG brazing of galvanised sheet with CuSi3.
  • Industrial and agricultural maintenance.

📋 Technical specifications

  • Processes: MIG/MAG, gasless wire, MMA and DC TIG Lift
  • Current: 20-160 A
  • Duty cycle: 160 A at 30 % (40 ºC)
  • Open-circuit voltage: 56 V
  • Power supply: 230 V, 50-60 Hz
  • Spool: up to 5 kg, Ø 200 mm
  • Steel wire: 0.6-1.0 mm
  • Aluminium wire: 0.8-1.0 mm
  • CuSi3 wire: 0.8-1.0 mm
  • Flux-cored wire: 0.8-1.0 mm
  • Electrodes: 1.6-3.25 mm
  • Protection: IP21S
  • Weight with packaging: 6.5 kg

💡 Pro tip: for aluminium, switch to a Teflon liner and U-groove rolls, and use pure argon: with a steel liner aluminium wire jams. And check the nozzle and contact tip regularly: most wire feed problems start there.

Complete your kit

For gas-shielded MIG you will need a cylinder of welding gas with its regulator and a spool of wire in the material you are going to weld; for aluminium, aluminium wire with a Teflon liner. Add an auto-darkening welding helmet, welding gloves and an anti-spatter spray to keep the nozzle and contact tip clean.

Frequently asked questions

Can I weld without gas?

Yes, with self-shielded flux-cored wire. With solid wire you will need shielding gas.

Which spools does it take?

Up to 5 kg and 200 mm in diameter, as well as smaller ones.

Does it weld aluminium?

Yes, with 0.8-1.0 mm aluminium wire and pure argon.

Does it run on 230 V?

Yes, it is single-phase.

Can I weld with stick electrodes?

Yes, with electrodes from 1.6 to 3.25 mm.

Frequently Asked Questions

Can I weld without gas?

Yes, with self-shielded flux-cored wire. With solid wire you will need shielding gas.

Which spools does it take?

Up to 5 kg and 200 mm in diameter, as well as smaller ones.

Does it weld aluminium?

Yes, with 0.8-1.0 mm aluminium wire and pure argon.

Does it run on 230 V?

Yes, it is single-phase.

Can I weld with stick electrodes?

Yes, with electrodes from 1.6 to 3.25 mm.