Skip to product information
  • Soldador multiproceso sinérgico industrial Vica Work - Vetonek
  • Soldador multiproceso sinérgico industrial Vica Work - Vetonek
  • Soldador multiproceso sinérgico industrial Vica Work - Vetonek
  • Soldador multiproceso sinérgico industrial Vica Work - Vetonek

Synergic MIG, stick and TIG multi-process welder with LCD screen

1.273,02 €
1.273,02 € 1.299,00 €
You save 2% (25,98 €)

Delivery in 3–15 days

Tax included. Shipping calculated at checkout.
Model

Synergic MIG, stick and TIG multi-process welder with LCD screen

Industrial-range machines for workshops that weld every day: MIG/MAG, stick and TIG Lift, with synergic or manual adjustment and an LCD screen. The 60 % duty cycle at 250 A lets you do serious work without stopping for overheating.

Choose the 250 A, 230 V single-phase model if you do not have a three-phase supply, or the 300 A, 400 V three-phase model for thicker material. Both take 0.6 to 1.2 mm wire in steel, aluminium, flux-cored and braze wire, and electrodes from 1.6 to 4 mm.

✅ Key benefits

  • 60 % duty cycle: 250 A at 60 % at 40 ºC on both models.
  • Synergic or manual: automatic setting based on material and thickness, or full control.
  • Wire up to 1.2 mm: steel, aluminium, flux-cored and braze wire.
  • Single-phase or three-phase: 250 A at 230 V or 300 A at 400 V.
  • LCD screen: parameter setup and monitoring.

🏗️ What it is for

  • Fabrication, metalwork and structural steelwork.
  • Manufacture of machinery, trailers and commercial vehicle bodies.
  • Industrial maintenance with long welding shifts.
  • Workshops working with 1.0-1.2 mm wire.

📋 Technical specifications

  • Processes: MIG/MAG, MMA and DC TIG Lift
  • Current: 50-250 A (230 V) / 50-300 A (400 V)
  • Duty cycle: 250 A at 60 % (40 ºC)
  • Open-circuit voltage: 50 V (250 A) / 55 V (300 A)
  • Power supply: 230 V single-phase / 400 V three-phase, 50-60 Hz
  • Steel wire: 0.6-1.2 mm
  • Aluminium / flux-cored / braze wire: 0.8-1.2 mm
  • Electrodes: 1.6-4.0 mm
  • Adjustment: synergic or manual
  • Protection: IP21S
  • Compatible accessories: 3 m MT15 wire torch and 35-50 MMA clamp kit
  • Weight with packaging: 32.24 kg (250 A) / 33 kg (300 A)

💡 Pro tip: before deciding, check your electrical installation: the 250 A model runs on 230 V but needs a proper circuit and RCD; if your workshop has a three-phase supply, the 300 A, 400 V model spreads the load better and gives you more headroom for thick material.

Frequently asked questions

Which model should I choose?

250 A if you only have 230 V single-phase power; 300 A if you have a 400 V three-phase supply and weld thicker material.

How long can it weld continuously?

Both have a duty cycle of 250 A at 60 % at 40 ºC.

Which wires does it take?

Steel from 0.6 to 1.2 mm and aluminium, flux-cored and braze wire from 0.8 to 1.2 mm.

Can I weld with stick and TIG?

Yes, MMA with electrodes from 1.6 to 4 mm and TIG Lift with a valve TIG torch.

Does it work without gas?

Yes, with self-shielded flux-cored wire.

Frequently Asked Questions

Which model should I choose?

250 A if you only have 230 V single-phase power; 300 A if you have a 400 V three-phase supply and weld thicker material.

How long can it weld continuously?

Both have a duty cycle of 250 A at 60 % at 40 ºC.

Which wires does it take?

Steel from 0.6 to 1.2 mm and aluminium, flux-cored and braze wire from 0.8 to 1.2 mm.

Can I weld with stick and TIG?

Yes, MMA with electrodes from 1.6 to 4 mm and TIG Lift with a valve TIG torch.

Does it work without gas?

Yes, with self-shielded flux-cored wire.