220 A pulsed HF TIG welder with stick mode

410,62 €
410,62 € 419,00 €
You save 2% (8,38 €)

Delivery in 3–15 days

Tax included. Shipping calculated at checkout.
Packaging

220 A pulsed HF TIG welder with stick mode

Designed for anyone looking for fine, clean beads on steel and stainless steel. It welds DC TIG with high-frequency (HF) arc start or contact start (Lift), and also stick (MMA), from a 230 V socket.

It has two pulse functions with plenty of parameters for advanced users and a quick, automatic Cold Weld mode, ideal if you are just getting started with TIG. Digital display, 2T/4T modes, adjustable pre-gas and post-gas and a 4 m torch.

✅ Key benefits

  • HF and Lift TIG: arc start without touching the workpiece (HF), or contact start where high frequency could cause interference.
  • Pulse: less heat input and less distortion on thin sheet and stainless steel.
  • Cold Weld mode: quick automatic setup for beginners.
  • 2T/4T and adjustable gas: pre-gas 0-1 s and post-gas 0.1-10 s.
  • MMA too: electrodes from 1.6 to 4 mm.
  • Compact: around 7 kg with packaging, with carrying handle.

🏗️ What it is for

  • Welding stainless steel for commercial kitchens, railings and furniture.
  • Light fabrication, tube and thin sheet.
  • Precision work in workshops and maintenance.
  • Stick welding when no gas is available.

📋 Technical specifications

  • Processes: DC TIG HF, TIG Lift and MMA
  • Current: 10-220 A
  • Duty cycle: 200 A at 30 % / 126 A at 60 % (EN 60974-1)
  • Power supply: 230 V, 50-60 Hz
  • Power consumption: 6.4 / 10 kW
  • Open-circuit voltage: 64 V
  • MMA electrode: 1.6-4.0 mm
  • TIG tungsten: 1.0-3.2 mm
  • Pre-gas / post-gas: 0-1 s / 0.1-10 s
  • Modes: 2T/4T, pulse, Cold Weld
  • Protection: IP21S
  • Includes: 4 m TIG torch (35/50 connector)
  • Weight with packaging: 7 kg
  • Package dimensions: 38 x 13 x 23 cm

💡 Pro tip: on stainless steel, extend the post-gas by a few seconds so the tungsten and the end of the bead cool down under shielding: the bead will not turn black and the tungsten will last much longer. Grind the tungsten lengthways towards the tip, never in a circle.

Frequently asked questions

Can it weld aluminium?

No. It is a DC TIG machine, suitable for steel, stainless steel, copper and similar metals. Aluminium requires an AC/DC TIG machine.

What is HF arc start?

High frequency strikes the arc without touching the workpiece with the tungsten, so the tungsten is not contaminated.

What gas do I need?

Pure argon for TIG. The cylinder and regulator are sold separately.

Can I weld with stick electrodes?

Yes, it has an MMA mode for electrodes from 1.6 to 4 mm.

What is included?

The machine with a 4-metre TIG torch.

Frequently Asked Questions

Can it weld aluminium?

No. It is a DC TIG machine, suitable for steel, stainless steel, copper and similar metals. Aluminium requires an AC/DC TIG machine.

What is HF arc start?

High frequency strikes the arc without touching the workpiece with the tungsten, so the tungsten is not contaminated.

What gas do I need?

Pure argon for TIG. The cylinder and regulator are sold separately.

Can I weld with stick electrodes?

Yes, it has an MMA mode for electrodes from 1.6 to 4 mm.

What is included?

The machine with a 4-metre TIG torch.