Soundproof belt-driven three-phase compressor - 5.5 to 10 HP and 10 bar
Soundproof piston compressor from 5.5 to 10 HP
All the air flow of a workshop belt-driven compressor, but inside a soundproof cabinet: between 63 and 65 dB, the level of a conversation. It can be installed next to the workstations without needing a compressor room.
Two-cylinder, two-stage pump with cast-iron head, belt drive and timer-controlled fan cooling. Integrated control panel with monitoring and alarms. Choose the version without air tank (to connect to your own tank) or mounted on a 270 or 500-litre air tank.
✅ Key advantages
63-65 dB: genuinely soundproof, suitable for working right next to it.
Two stages in cast iron: withstands intensive daily use for years.
Up to 1,074 L/min: air flow for several tools or spray guns at once.
Timer-controlled fan: keeps the working temperature inside the cabinet under control.
Control panel with alarms: monitor the unit at a glance.
Three configurations: without air tank, with 270 L or with 500 L.
🏗️ What it is for
Body and paint shops, carpentry and metalwork workshops.
Workshops on ground floors or in units with neighbours nearby.
High-consumption air tools in continuous use.
Replacing a noisy belt-driven compressor with a soundproof one.
Models: 5.5 HP without air tank · 5.5 HP 270 L · 7.5 HP 270 L · 10 HP 500 L
Intake air flow: 727 / 727 / 872 / 1,074 L/min
Maximum pressure: 10 bar
Voltage: 400 V three-phase
Speed: 1,000 - 1,200 rpm
Sound level: 63 - 65 dB
Drive: belts
Cooling: timer-controlled fan
Packed weight: 168 / 195 / 205 / 321 kg
💡 Pro tip: on a belt-driven compressor, check the belt tension and the oil level once a month. A loose belt slips, overheats the pump and reduces the air flow without you noticing; tightening it takes a minute.
FAQ
How much noise does it make?
Between 63 and 65 dB depending on the model, thanks to the soundproof cabinet. You can work next to it without hearing protection.
What is the difference between the version without air tank and the 270 or 500 L versions?
The version without air tank connects to a tank or installation you already have. The 270 and 500 L versions have the air tank built in and are ready to use.
What power supply does it need?
400 V three-phase.
Is it suitable for intensive daily use?
Yes. The two-stage pump with cast-iron head and timer-controlled cooling are designed for intensive workshop use.
Does it need maintenance?
The usual for an oil-lubricated belt-driven compressor: check the oil, the belt tension and the intake filter, and drain the air tank.
