10 mm reversible pneumatic drill with keyless chuck
A drill that weighs little, does not overheat and has no cable to get tangled: that is what working with this 10 mm reversible pneumatic drill is like. Weighing just 1.1 kg and with a keyless chuck, it drills metal, wood and plastic in the workshop all day long without tiring your hand.
Its cast aluminium body resists knocks and corrosion, the rotation is reversible and it runs at 1,800 rpm with a consumption of 106 l/min. A 2-3 HP compressor is more than enough to power it.
It is a tool designed for daily use in the workshop: robust, lightweight and cordless. Connect it with a rubber hose with quick coupler, add an in-line lubricator and work with dry, filtered air so that the air motor keeps its performance for years. The keyless chuck lets you change drill bits with one hand.
✅ Key benefits
Just 1.1 kg: easy to handle in repetitive jobs.
10 mm keyless chuck: change drill bits without a key.
Cast aluminium: resistant to knocks and corrosion.
Low consumption: 106 l/min, suitable for 2-3 HP compressors.
🏗️ What it is for
Drilling metal, wood and plastic in the workshop.
Industrial and machinery maintenance.
Series assembly.
Bodywork and light metal fabrication.
📋 Technical specifications
Chuck: keyless, 10 mm (3/8")
Speed: 1,800 rpm
Rotation: reversible
Air consumption: 106 l/min
Maximum pressure: 10 bar
Air inlet: 1/4"
Body: cast aluminium
Weight: 1.1 kg
💡 Vetonek tip: lubricate the tool with a few drops of pneumatic oil before each working day and drain the water from the tank: you will greatly extend the life of the motor.
Frequently asked questions
What compressor do I need?
One that comfortably delivers 106 l/min; a 2-3 HP compressor is more than enough.
Do I need a key to change the drill bit?
No, the chuck is keyless.
How much does it weigh?
1.1 kg.
What materials can it drill?
Metal, wood and plastic, with drill bits up to 10 mm.
What is the maximum pressure it takes?
Up to 10 bar; it normally works at the regulated pressure of the workshop line.
Frequently Asked Questions
What compressor do I need?
One that comfortably delivers 106 l/min; a 2-3 HP compressor is more than enough.
Do I need a key to change the drill bit?
No, the chuck is keyless.
How much does it weigh?
1.1 kg.
What materials can it drill?
Metal, wood and plastic, with drill bits up to 10 mm.
What is the maximum pressure it takes?
Up to 10 bar; it normally works at the regulated pressure of the workshop line.
Todo excelente. Tras una primera equivocación con el producto elegido, el equipo de atención al cliente se puedo a trabajar para solucionar el problema y darme una solución adecuada.
