13 mm reversible pneumatic drill with keyless chuck
Compressed air drill from Aeropro with a 13 mm keyless chuck, for large drill bits and maintenance work in workshops and industry.
It runs at 700 rpm, a low speed designed for large-diameter drill bits and for drilling metal with control. It is reversible, very light for prolonged use and has P6 industrial bearings.
✅ Key benefits
13 mm chuck: takes larger drill bits than a 10 mm drill.
Keyless: you change drill bits without a key.
Reversible: for freeing jammed drill bits or loosening.
Low speed: 700 rpm, ideal for large diameters and metal.
P6 bearings: long service life in professional use.
Lightweight: less fatigue during long jobs.
🏗️ What it is for
Mechanical and industrial maintenance workshops.
Locksmithing and light metal fabrication.
Drilling large diameters in metal and wood.
Assembly and repair work in hard-to-reach areas.
📋 Technical specifications
Chuck: keyless, 13 mm
Speed: 700 rpm
Rotation: reversible
Air consumption: 114 l/min
Air inlet: 1/4"
Recommended compressor: 2 HP
Bearings: P6 industrial
Packed weight: 1.19 kg
Packaging: 22 x 15 x 5 cm
💡 Pro tip: with large drill bits, first mark with a centre punch and drill a 4-6 mm pilot hole: the 13 mm drill bit will go in centred without straining the motor.
🔧 How to get the most out of it
Its low speed is an advantage for large drill bits and for drilling metal with control: do not force the tool, let the torque do the work. Connect it with a hose of sufficient bore and a quick coupler, fit an in-line lubricator and drain the compressor tank when you finish so that no water reaches the air motor.
Frequently asked questions
What compressor do I need?
A 2 HP compressor that delivers at least 114 l/min.
Why does it have such a low speed?
Because it is designed for large drill bits and metal, where more torque and less speed are needed.
Is it reversible?
Yes.
Does the chuck need a key?
No, it is keyless.
How do I maintain it?
A few drops of pneumatic oil in the air inlet before use, and clean, dry air.
Frequently Asked Questions
What compressor do I need?
A 2 HP compressor that delivers at least 114 l/min.
Why does it have such a low speed?
Because it is designed for large drill bits and metal, where more torque and less speed are needed.
Is it reversible?
Yes.
Does the chuck need a key?
No, it is keyless.
How do I maintain it?
A few drops of pneumatic oil in the air inlet before use, and clean, dry air.
Todo excelente. Tras una primera equivocación con el producto elegido, el equipo de atención al cliente se puedo a trabajar para solucionar el problema y darme una solución adecuada.
