Albarracín Bicolor Pavement - high strength for all types of traffic
Albarracín Bicolor Pavement: color that lasts through the years
The problem with most colored pavements is that the tone fades with sun and wear, and after two summers the floor looks like a different one. This pavement is made with a bicolor aggregate blend, usage class 3, designed to withstand heavy traffic in both private and public spaces without losing its finish.
✅ Key advantages
Stable bicolor finish: the color is part of the piece's body, not a surface layer that can lift.
Three formats: 40 × 40, 50 × 50 and 60 × 40 cm, to fit the layout to each area without unnecessary cuts.
Usage class 3: suitable for heavy traffic depending on the chosen thickness, between 2.5 and 3.5 cm.
Three combinable colors: anthracite, sand and bronze, which combine with each other and with the rest of the collection.
🏗️ Recommended applications
Terraces, patios and porches.
Garden paths and pedestrian access.
Common areas of housing developments and public spaces.
Pool decks and sun terraces.
📋 Technical specifications
Formats: 40 × 40 × 2.5 cm, 50 × 50 × 2.5 cm and 60 × 40 × 2.5 cm.
Thicknesses: 2.5 cm and 3.5 cm.
Weight per unit: 8.4 kg.
Usage class: 3.
Colors: anthracite, sand and bronze.
Units per pallet: 92 units (40 × 40), 88 units (50 × 50), 90 units (60 × 40).
🧰 Installation
Compact the ground and spread a 10-15 cm sub-base of crushed gravel.
Level a 3-5 cm sand bed keeping a minimum slope of 1.5% towards the drain.
Open pieces from several pallets at once and mix them before laying.
Lay the slabs with an open joint of 3-5 mm, bedding with a rubber mallet.
Check level and alignment every three or four rows.
Fill the joints with silica sand and sweep off the excess.
📦 Available formats
40 × 40 cm at 2.5 and 3.5 cm thick.
50 × 50 cm at 2.5 and 3.5 cm thick.
60 × 40 cm at 2.5 cm thick.
Anthracite, sand and bronze.
💡 Professional tip: with bicolor pieces, the trap is the batch. Two pallets made in different weeks can carry a slightly different hue, and if you lay one pallet in full and then the next, you'll see the line from the doorway. Always open two or three pallets at once and mix pieces as you go: it costs nothing and saves you from redoing half a patio.
Frequently Asked Questions
¿Qué significa clase de uso 3?
Que la pieza está homologada para tránsito peatonal intenso, como zonas comunes o espacios públicos.
¿El color se va con el sol?
No; el bicolor está integrado en la masa de la pieza, no es una capa pintada en superficie.
¿Puedo combinar los tres colores?
Sí, comparten formato y grosor, así que se pueden alternar en un mismo despiece.
¿Cuántas piezas necesito por metro cuadrado?
6,25 en 40 × 40 cm, 4 en 50 × 50 cm y 4,17 en 60 × 40 cm.
¿Cuánto pesa cada losa?
8,4 kg por unidad.
¿Sirve para el borde de una piscina?
Sí, es habitual en playas de piscina y solariums; conviene respetar la pendiente de evacuación.
¿Cuántas unidades trae un palet?
92 en el formato 40 × 40 cm, 88 en 50 × 50 cm y 90 en 60 × 40 cm.
¿Qué grosor elijo?
2,5 cm para uso peatonal normal y 3,5 cm cuando el paso sea continuo o haya carga de mobiliario pesado.
