Albarracín Slate-Texture Pavement - class 4 for vehicle and pedestrian traffic
Albarracín Slate-Texture Pavement: stone relief with the strength of concrete
A completely flat pavement leaves outdoor spaces feeling cold and impersonal, and natural slate, which does have that relief, is expensive and fragile. This slab reproduces slate's texture in a piece rated usage class 4, suitable for heavy vehicle and pedestrian traffic, with a warm two-tone finish.
✅ Key advantages
Slate-type texture: irregular relief that adds character and breaks up the flat, anonymous-floor effect.
Usage class 4: the highest in the collection, it takes vehicle traffic as well as pedestrian use.
Non-slip relief: the texture itself improves grip in areas that get wet.
Three warm colors: anthracite, sand and bronze, which combine with the rest of the pieces in the collection.
🏗️ Recommended applications
Driveways and garage entrances at home.
Terraces, patios and porches.
Garden paths and high-traffic areas.
Squares and public spaces with mixed traffic.
📋 Technical specifications
Dimensions: 50 × 50 cm.
Thicknesses: 3.5 cm and 4.5 cm.
Usage class: 4.
Pieces per m²: 4.
Colors: anthracite, sand and bronze.
Units per pallet: 52.
🧰 Installation
Prepare a 15 cm compacted crushed-gravel base if any vehicle will drive over it.
Spread and screed a 4-5 cm sand bed with a drainage slope.
Lay the pieces, bedding them with a rubber mallet without striking the relief directly.
Keep an open joint of 3-5 mm and check the level every few rows.
Fill the joints with silica sand and compact with a plate compactor fitted with protective rubber.
Sweep off the excess thoroughly so the texture stays clean.
📦 Available formats
50 × 50 × 3.5 cm in anthracite, sand and bronze.
50 × 50 × 4.5 cm in anthracite, sand and bronze.
Sold by unit or by pallet of 52 pieces.
💡 Professional tip: if you use a plate compactor to bed it, always fit a rubber mat first. On a slate texture, a bare plate polishes the high points of the relief and leaves shiny marks that can't be removed afterwards. And allow for 10% extra pieces: in a 50 × 50 format, edge cuts waste almost half a slab each time.
Frequently Asked Questions
¿Aguanta el paso de un coche?
Sí, es clase de uso 4, apta para tráfico rodado ligero además del peatonal.
¿Qué grosor debo elegir?
3,5 cm para zonas peatonales y 4,5 cm donde pasen vehículos.
¿Es antideslizante?
La textura tipo pizarra mejora el agarre respecto a un acabado liso, especialmente con la superficie mojada.
¿Cuántas losas necesito por metro cuadrado?
4 piezas por m2.
¿Cuántas unidades trae el palet?
52 unidades.
¿Se puede limpiar con hidrolimpiadora?
Sí, a presión moderada y sin acercar la lanza al relieve para no desgastar las crestas.
¿Combina con el resto de la colección?
Sí, comparte gama de color con el pavimento liso, el bicolor, el escalón, el bordillo y el zócalo.
¿Sirve para interior?
Está pensada para exterior; en interior su relieve dificulta la limpieza diaria.
