How much stone do I need?
How much stone do I need for the ground?
For pebble and gravel:
• approximately 80kg per m², based on a 5cm layer.*For particle sizes >32mm, a thicker layer is required.
• Consumption per sack: 1000kg = 0.625m³.
• Coverage: approximately 12.5m² with a 5 cm layer.
For pine bark:
• approximately 70L per m², based on a 5cm layer.
• Consumption per sack: 1000L = approximately 1m³ = approximately 600kg
• Coverage: approximately 14m² with a 5 cm layer.
For volcanic, slate and chamotte:
• approximately 50kg per m², based on a 5cm layer.
• Consumption per sack: 1000kg = approximately 1m³
• Coverage: approximately 20m² with a 5 cm layer
How much stone do I need to fill a gabion?
Density of approximately 1,650kg per 1m³.
The calculation is very easy to understand with an example: if you have a gabion of 100x50x30 cm, you must do the following calculations:
1x0.5x0.3 = 0.15m³
0.15x1,650 = 247.50kg of stone.
*It is always a good idea to calculate an extra 5%, since when gabions are filled they expand a little and a little more stone always fits than in the theoretical calculations.
Clarifications
ATTENTION!
The grain sizes of GRAVELS AND pebbles are sieve sizes
The actual sizes may vary slightly, since when talking about, for example, 60-80mm stone, it means that the stones pass through an 80x80mm square mesh and do not pass through a 60x60mm one.
Through that 80x80 mesh, a stone 100mm long and 65mm wide can pass, so there may be a percentage of stones larger than 80 and smaller than 60mm.
Breakage of pebbles
On the other hand, in pebbles larger than 60mm, there is a percentage of up to 10% of stones that can break during sorting, washing, loading and unloading; to this day we do not have machinery that prevents such breakages.
In the photos you can see, only real products are shown; broken pieces have not been removed.
Dust and sand in the products
This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; the stone will wash itself over time or you can pour water on it before using it.
Ecological Weed Killer
General Description: The Concentrated Alcohol Vinegar is a natural and versatile solution that Mineravi.com offers as part of its commitment to sustainable agriculture. This product, which complies with the Implementing Regulation (EU) 2015/1108, is ideal for use in Organic Agriculture due to its multiple benefits as a weed killer, antifungal, bactericide, and for the overall improvement of the soil.
Components and Features:
- Composition: Alcohol vinegar.
- Properties: Natural weed killer, antifungal, and bactericide.
- pH: Between 2.0 and 2.3, which helps improve soil pH.
- Acidity Concentration: 200 gr/L, expressed in acetic acid.
- Physical-Chemical Characteristics: Free of methanol, sulfurous, and with low residual alcohol content.
Benefits and Uses:
- Ecological Weed Killer: Effective against a variety of weeds, leaving no toxic residues and is friendly to the natural environment.
- Soil Health Improvement: Stimulates nutrient absorption and prevents iron chlorosis while balancing soil pH.
- Limestone Descaler: Ideal for irrigation systems with hard water, cleaning and preventing blockages.
- Antifungal and Bactericide: Protects plants from diseases by preventing the appearance of fungi and bacteria.
- Animal Repellent: Dissuades animals and rodents from the crops.
- pH Adjuster in Irrigation Water: Reduces the pH of irrigation water, favoring nutrient absorption by plants.
Application and Dosage:
- As a Weed Killer: Dilute to 30% with water and apply during the hottest hours to accelerate the effect.
- Limestone Descaler: Use at 5% as a preventive; for treatment, apply 40 L/ha.
- To Lower pH of Irrigation Water: Add 5 liters of vinegar for every 100 liters of water.
- Frequency: Apply regularly to maintain and improve soil quality and plant health.
Presentation: The Concentrated Alcohol Vinegar is available in a 25-liter container, adapting to the needs of both small gardens and large agricultural operations.