Rubber tiles
¿Cuanto material necesitas?
¿Cuanto material necesitas?
How much stone do I need?
How much stone do I need for the ground?
For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.
For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.
For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm
How much stone do I need to fill a gabion?
Density of ± 1,650kg by 1m³.
The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.
Clarifications
ATTENTION!
Granulometries are sizes of sizes
Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.
Broken stones
On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.
In the photos you can see, only real products are seen, broken pieces have been removed.
Dust and sand in products
This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.
Rubber tiles
Our ecological recycled rubber tiles They are the perfect solution for sustainable pavements. Composed from crushed truck wheels, we ensure a complete tire cycle, thus guaranteeing a Raw material free of harmful materials for use. This feature not only closes the recycling cycle, but also provides a safe product for all.
Product characteristics
- Composition: 90% recycled rubber.
- Security: Free of harmful substances such as CIFC, PCB, Lindano and Formaldehyde.
- Endurance: Ideal for extreme weather conditions; It adapts both to marine and interior environments with low temperatures.
- Versatility: Suitable for interior and exterior use, ideal for children's parks, shooting galleries, stables and cowgirls.
Dimensions
- Lisa: 100x50x4 cm (design that simulates 50x50 cm tiles).
- Bevel: 100x50x4-1.5 cm (with a side ramp for soft transition).
- Corner: 50x50x4-1.5 cm (for effective and safe terminations).
Materials and specifications
- Material: Recycled rubber granulate with polyurethane.
- Density: 1.06 g/cm3.
- Hardness: 70º Shore A.
- Abrasion resistance: 125.
- Critical drop height: Complies with the EN-1177 standard (HAC of 1.22).
Advantages
- Employment and impact absorption for more comfort.
- Fully elastic soil, ideal for any activity.
- Water permeability, avoiding puddles.
- Non -slip and soundproof properties.
- Resistance to adverse weather conditions.
- Dimensional stability, easy to combine and clean.
- Ecological material, pleasant to touch and tread.
Application
Its installation is simple and fast. For a perfect subjection, the use of polyurethane tail as an adhesive.