180x500 cm red garden retractable side awning

101,17 €
101,17 € 113,86 €
You save 11% (12,69 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This lateral awning is simple as elegant and creates a small and cozy corner, offering the intimacy you need on the terrace, the patio or the balcony. It also protects from wind and low sun. The screen is made of polyester resistant to UV rays, water and tear. The reel is installed on a robust steel base in vertical position, and retractable awning can be easily removed. The awning has an automatic setback function. Delivery also includes assembly accessories.

  • Color: Red and Gray
  • Material: fabric (100% polyester) with PU + coating with powder coating steel
  • Dimensions: 180 x (0-500) cm (high x wide)
  • Fabor weight: 180 g/m²
  • Water resistant and UV rays
  • Note: The 180 cm housing consists of two parts of 90 cm high.
Attention: Risk of injury! When repairing, modifying, disassembling and discarding the sun protection system, the pieces under voltage (eg folding arms, contracting systems) must be completely relaxed or ensured previously. To do this, a specialist must be hired! Do not use the awning if you are damaged and need repair or adjustment. The lateral awning should be retracted if the wind speed exceeds 28 km/h. The lateral awning should be retracted in case of adverse weather conditions, such as intense rain or snow. The operation in frost conditions can damage the product. Attention: Fire risk! Do not use barbecues, heater, kitchen utensils or candles near the awning. Be careful during installation, there may be a risk of crushing and cutting. Be careful with fingers during installation. To avoid the danger of suffocation, keep this plastic bag out of the reach of babies and children. Do not use this bag in cribs, beds, strollers or playgrounds. This bag is not a toy. Danger! Danger of suffocation! Keep small pieces out of the reach of children.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.