200x100 cm garden stake fence

90,45 €
90,45 € 101,80 €
You save 11% (11,35 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This rustic fence will be an excellent decorative barrier for your garden or patio, or an edge for your sacks or other elements of the garden. It is made of a compound of wood and plastic, which makes it very robust, durable and water resistant and rot. You can easily change the size of this fence to adapt it to your garden. This WPC fence is a perfect solution for any garden or other outdoor space. Keep in mind that this fence is supplied in pieces.

  • Color: Brown
  • Material: compound of wood and plastic (WPC)
  • Dimensions: 200 x 100 cm (length x wide)
  • Distance between the stakes: 9 cm
  • With 12 stakes in total
  • Note: This is near parts
  • Assembly time: approx. 0.5 hours

¿Cuanto material necesitas?

¿Cuanto material necesitas?

+ info

Longitud de una superficie rectangular que quieras cubrir. Puedes indicar también directamente el área.

+ info

Anchura de una superficie rectangular que quieras cubrir. Puedes indicar también directamente el área.

Si conoces el área, puedes ingresarla directamente en metros cuadrados. Si no, el área se calculará automáticamente con el largo y el ancho.

+ info

Profundidad de la capa de material deseada en centímetros. No se recomienda una capa inferior a 5 cm.

+ info

Selecciona el tipo de material para calcular la densidad en kg/m³.

RESULTADO (KG)

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.