Skip to product information
  • Vetonek Toldo retráctil de tela y acero gris antracita 200x150 cm

200x150 cm anthracite fabric and steel awning

91,89 €
91,89 € 103,42 €
You save 11% (11,53 €)
Tax included. Shipping calculated at checkout.

Description

Enjoy a fresh drink, a tasty delicacy or a good conversation with friends on the terrace while you relax under this retractable awning! Durable material: The patio awning frame is made of steel, which is robust and durable. The fabric with superficial treatment of PU is resistant to UV rays. It will protect your family or your guests from UV and dazzling sun. Retractable function: Thanks to the handle crank, the window awning is retractable to meet your different needs. When opening it, it provides a good shadow and, when collected, it does not block the view. Adjustable height: The height of the support bars can be adjusted between 210 and 300 cm to adapt to a wide range of windows and doors heights. Various uses: The extensible awning presents a simple and elegant design that will combine well with your home or commercial environment. It is used for many sites, such as balconies, patios, terraces, restaurants, coffee shops, shops, etc.

  • Awning:
  • Color: Anthracite gray
  • Material: fabric (180 g/m² of polyester) with PU coating
  • Dimensions: 200 x 150 cm (length x wide)
  • Structure:
  • Color: Anthracite gray
  • Material: Steel
  • Flexible installation height: 210-300 cm
  • Crank length: 125 cm
  • It works manually
  • Requires assembly: Yes

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.