Skip to product information
  • 280046 Vetonek Dressing Console Table with 3 Drawers Black

280046 Dressing Console Table with 3 Draweers Black

194,16 €
194,16 € 218,52 €
You save 11% (24,36 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Our console table has a simple but modern design, being ideal for your living room, dining room, hallway and in any other space. The table has an excellent hand job that combines at the same time great functionality. Thanks to its compact design, our console table occupies very little space and is ideal for smaller areas. The three soft opening drawers will offer you additional space for your ornaments, cosmetics and other personal objects. This dressing table is built with MDF and high quality pine wood, with a black painted finish for greater durability, which provides you with years of service.

  • Color: Black and Brown
  • Material: MDF + Pinewood
  • General dimensions: 100 x 35 x 78 cm (length x width x high)
  • Large Drawer Size: 36.5 x 29 x 9.5 cm (l x w x h)
  • Small Drawer Size: 24.4 x 29 x 9.5 cm (l x w x h)
  • With Iron Knobs
  • WARNING: To avoid turnaround, this product should be used with the device provided to fix it to the wall
  • Legal Documents:

    You can find more details on how to prevent furniture from turning here

Do not use this article if any component is broken, torn or foul.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.