282768 MATTRESS TOPPER 80x200 CM COLD FOAM EGG PROFILE 6 CM

94,72 €
94,72 € 106,61 €
You save 11% (11,89 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Enjoy a good night of sleep in our extra soft overcolchone! This topper, approximately 6 cm thick, is extra soft and comfortable. 1. PU foam gel foam foam technology, this topper is particularly breathable, creating a balanced rest atmosphere and protecting the mattress. PU foam, also called cold foam, has an open cell structure. Therefore, it is good for the ventilation and regulation of moisture, which can regulate the temperature of the bed in an optimal way, so there is no huge loss of heat, nor an overheating instead. 2. Overalls of the overcolchone pressure can decrease the loading of the body pressure, which allows its bones and stressed joints, especially the area of ​​the spine and the neck, can recover enough during the night. The mattress pad can adapt to the contour of your body precisely for a harmonious sleep experience. 3. Comfort In all Areasa Difference to conventional mattresses with limited comfort zones, the envelope provides its entire support surface, from the corner to the edge. Therefore, it is not necessary to change the sleeping position frequently and unconsciously during the night. In addition, there will be no more noise when moving on the mattress. 4. Easy to keep a large amount of sweat and other pollutants in the mattress, but thanks to the complete zipper practice, the washable case can be easily removed, which makes the case easy to clean. We recommend that you ventilate the mattress regularly to prolong the useful life. Note: The product is rolled up and sealing in vacuum for transport. Once open, the product needs approximately 72 hours in a warm environment to recover its normal shape.

  • Color: White
  • Material: Pu Foam D25
  • Cover material: 100% polyester
  • Overall dimensions: 80 x 200 x 6 cm (l x w x t)
  • Foam Thickness: 4 cm
  • Top layer foam thickness: 1 cm
  • Bottom Layer Foam Thickness: 1 cm
  • Washable cover
  • All-Round Zipper

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.