Skip to product information
  • 3 Piezas de enchufe de sensor de oxígeno y enchufe de interruptor

3 pieces of oxygen sensor plug and switch plug

24,38 €
24,38 € 27,44 €
You save 11% (3,06 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This 3 pieces of sensor plug and switch plug is ideal for the elimination of oxygen sensors from exhaust collectors in many models. The switches are built with vanadium steel and molybdenum for greater resistance and durability with a black oxide finish to fight rust. The oxygen sensor plug can fit in almost all cars. The 3/8 "Dr. 7/8" (22m/m) Zocalo of the torch nut is for the vacuum switch and service of the oxygen sensor in the computer controlled engines. All the tools come in a box Storage for easy transport. The delivery includes two 7/8 "x 3/8" Vacuum switch plugs and one 7/8 "x 1/2" by car of the oxygen sensor plug.

  • 7/8 "or 22 mm switch plug fits O2 sensors
  • Use with 3/8 "or 1/2" Breaker bar or the plug key
  • Material: molten steel / chrome steel
  • Applicable: VW, Audi, Seat, Renault, Mercedes, BMW, Nissan and more.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.