Skip to product information
  • Vetonek Mesa de centro de aluminio martillado blanco 70x30 cm

70x30 cm white hammered aluminum center table

234,80 €
234,80 € 264,26 €
You save 11% (29,46 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This striking center table will become the center of attention of any room and will be the ideal complement for a wide variety of furniture styles. It can be used as auxiliary table, auxiliary table or sofa table. Made of hammered aluminum, this center table is durable and high quality. Our table has a robust surface, in which food or drinks can be placed, or exhibit decorative objects such as photo frames or even pots. It has a beautiful drawing on the surface. Its attractive hammer appearance also brings a touch texture to the table. This article is previously mounted; No assembly is needed.

  • Color: White
  • Material: hammered aluminum
  • Dimensions: 70 x 30 cm (high x diameter)
  • Painted and polished
  • With a beautiful drawing on the surface
  • Drum design
  • It does not require assembly

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.