Skip to product information
  • Vetonek Alfombra de piel de vaca auténtica negro y blanco 180x220 cm

Alfombra de piel de vaca auténtica negro y blanco 180x220 cm

251,46 €
251,46 € 251,46 €
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

¡Dale a tu decoración de interior un toque del Oeste y un encanto salvaje con esta alfombra de piel de vaca auténtica! Alfombra de piel de vaca auténtica: La alfombra está hecha de piel de vaca auténtica que es duradera durante mucho tiempo y suave al tacto con suavidad y brillo sedosos.Fácil de limpiar: La alfombra de piel de vaca es fácil de limpiar con un paño húmedo, una aspiradora o simplemente puedes sacarla para sacudirla bien.Amplias gamas de uso: Puedes arrojar la piel de vaca sobre una silla como una manta para obtener textura extra y elegancia sin esfuerzo o simplemente usarla como tapiz para un estilo único. Esta alfombra de piel de vaca auténtica se adapta a todos los estilos de hogar y es adecuada para el salón, el dormitorio, el estudio, la oficina, etc. Información útil:Ten en cuenta que las cicatrices y las variaciones de color y tamaño forman parte natural del cuero, lo que hace que cada pieza de nuestras alfombras de piel de vaca sea única. La entrega es aleatoria, asegurando la exclusividad e individualidad del producto.

  • Color: Blanco y negro
  • Material: Piel de vaca auténtica
  • Tamaño: (160-180) x (200-220) cm (ancho x largo)

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.