Skip to product information
  • Sistema de riego automático con aspersión y temporizador

Automatic irrigation system with sprinkler and timer

51,58 €
51,58 € 58,06 €
You save 11% (6,48 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This automatic irrigation system with timer is ideal for watering all kinds of flowers, trees, pots in pot and more. It will be a practical contribution to your garden, backyard or patio. The programmer with an LCD screen can be adjusted to change the frequency and time with which plants must be watering. Compared to traditional sprinklers, this irrigation system reduces the amount of water used by up to 70% by directing water with precision to the roots. This automatic irrigation system works with 4 AA batteries (not included in delivery). The delivery includes a pump irrigation timer unit, a 10 m vinyl tube and 10 stainless steel spring plugs.

  • Color: Green
  • Dimensions (without pump): 20 x 8 x 5 cm (length x width x high)
  • Material: ABS + PP + PVC
  • Automatically water your plants precisely
  • It works with 4 AA batteries (not included)
  • Delivery includes:
  • 1 x smart controller (included pump)
  • 1 x 10 m vinyl hose
  • 10 x stainless steel spring plugs
This timer is designed only for outdoor use to control sprinklers or irrigation systems. The equipment cannot be used for industrial purposes, such as food, chemical and pesticides.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.