Crankshaft alignment Chain Distribution for BMW Mini Cooper R55 R56
Description
This complete motor synchronization tools game is designed for professional engine repairs, such as the replacement of the Board of Cyatics, the change of the distribution chain, the verification and adjustment of the synchronization of the camshaft, etc. This set of tools is suitable for BMW Mini One engines, Cooper, Cooper S and R55-56 series with N12, N14. It is also suitable for Citroen C4 (2008 to 2009), C4 Picasso (2008 to 2009), Peugeot 207 (2006 to 2009), 207 cc (2007 to 2009), 308 (2001 to 2009). Made with high quality materials, the kit is designed to last a long time in the daily use of the workshop. All tools are delivered in a practical case to save and transport easily.
- 10 tools in a case
- Suitable for changing the distribution chain, checking and adjusting camshaft synchronization
- The tools set:
- OEM crankshaft lock tool #119540
- OEM crankshaft locking tool # 119590
- OEM chain tensioner # 119340
- Adequate models:
- BMW Mini One / Cooper / Cooper S (Series R55-56 with N12, N14 Engine)
- Citroen C4 / C4 Picasso
- Peugeot 207, 207 cc, 308
- Motor codes:
- 1.4 VTI - EP6 8FS
- 1.6 VTI - EP6 5FW
- 1.6 THP - EP6DT 5FX
- 1.6 htp - Ep6dts 5fy
¿Cuanto material necesitas?
¿Cuanto material necesitas?
How much stone do I need?
How much stone do I need for the ground?
For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.
For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.
For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm
How much stone do I need to fill a gabion?
Density of ± 1,650kg by 1m³.
The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.
Clarifications
ATTENTION!
Granulometries are sizes of sizes
Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.
Broken stones
On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.
In the photos you can see, only real products are seen, broken pieces have been removed.
Dust and sand in products
This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.