Electric reclining chair synthetic leather anthracite

242,27 €
242,27 € 272,67 €
You save 11% (30,40 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Sit down and rest in this very comfortable electric reclining armchair! Electric reclining function: The reclining armchair is equipped with an electric motor for the reclining function. It has 3 reclining positions so that you can adjust the backing and restlessness with the manual control of 2 buttons included. As a seat: the thick padded seat, the backrest and the widths coated with synthetic leather coated provide a welcoming and warm sensation , as if they were hugging you. Synthetic leather is a very durable and stain resistant material, so it is easy to clean with a damp cloth. In addition, the smooth surface gives it a luxurious appearance and the beauty of the authentic skin. Solid and stable structure: the structure, made of wood and metal, provides a strong structure and stability. This reclining armchair is comfortable and durable.

  • Color: Anthracite gray
  • Material: Synthetic leather (40% polyester, 35% PU, 15% PVC, 10% cotton), plywood, iron
  • Total dimensions: 75 x 88 x 100 cm (wide x high x high)
  • Dimensions Seat: 53.5 x 54 cm (deep x width)
  • Seat height from the floor: 45 cm
  • Rear height: 68 cm
  • With an electric motor to adjust the backrest and restraint automatically
  • Input: 100-240 V ~; 50-60 Hz
  • Departure: DC 28 V
  • With 2 holders in the armrests
  • AJUSTABLE REPATIS AND BACK
  • Requires assembly: Yes

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.