Folding anchor galvanized cast iron 6 kg v77
Description
Make your trip on the water like silk with the folding anchor. Robust material: made of hot galvanized cast iron, the anchor is durable, wear and corrosion resistant and can be used for a long time. 4 claws: the 4 claws of the plot anchor have good contacts with the ground, as Sand, grass or mud, which causes the boat to remain in place, providing a safe and protected experience. Block by rotation: This turn block keeps the stable fins in the position deployed in a short time. In addition, the rope or anchor chain can easily be easily fixed. Portable estate: thanks to the folding function and compact size, the ship anchor is easy to store and transport. You can quickly save it in the backpack or in the bag and take it with you in your next aquatic adventure. Amlies uses: the grip anchor is suitable for various small boats, such as sailboats, inflatable boats, fishing boats, kayaks, canoes and paddle boards surfing.
- Color: Silver
- Material: hot galvanized cast iron, polypropylene (pp)
- Dimensions: 51 x 12 x 12 cm (length x width x high)
- Weight: 6 kg
- Rope diameter: 10 mm
- Rope length: 30 m
¿Cuanto material necesitas?
¿Cuanto material necesitas?
How much stone do I need?
How much stone do I need for the ground?
For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.
For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.
For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm
How much stone do I need to fill a gabion?
Density of ± 1,650kg by 1m³.
The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.
Clarifications
ATTENTION!
Granulometries are sizes of sizes
Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.
Broken stones
On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.
In the photos you can see, only real products are seen, broken pieces have been removed.
Dust and sand in products
This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.