Skip to product information
  • Vetonek Manguera jardín y pulverizador acero inoxidable plata 14mm 30 m

Garden and pulverizable stainless steel hose 14mm 30 m

89,22 €
89,22 € 100,41 €
You save 11% (11,19 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This stainless steel garden hose with spray nozzle is a great accessory to water the garden and facilitates plants irrigation. Durable material: made of stainless steel, the water hose is resistant to corrosion, twists, punctures and bites. 8 functions spray nozzle: This spray nozzle has 8 spray patterns, and you can choose the spray type by turning the nozzle to adapt it to your different purposes. At the same time, he has an non -slip and comfortable grip to offer you a good cleaning experience. Easy to save: This garden hose is not easily tangled and can be stored in small spaces. In addition, its light design allows it to take it anywhere. Large uses: This flexible garden hose is suitable for many different scenarios; You can use it for gardening, irrigation, cleaning, washing, pet bath, etc.

  • Color: Silver
  • Garden hose material: stainless steel
  • Connection material: ABS
  • Garden hose length: 30 m
  • Exterior diameter: 0; 6 "(14 mm)
  • Interior diameter: 0; 3 "(7 mm)
  • Spray nozzle dimensions: 6 x 6 cm (long x width)
  • Connection diameter: 12.7 mm (1/2 ")
  • Maximum working pressure: 5 bar (72 psi)
  • Maximum breakage pressure: 15 bar (217 psi)
  • Minimum operating temperature: -10 degrees
  • Maximum operating temperature: 60 degrees
  • With 8 functions spray nozzle
  • Delivery includes:
  • 1 x garden hose with spray nozzle
  • 2 x connectors without gray bump

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.