Skip to product information
  • Tilt Sombrilla de playa estilo Hawaii

Hawaii style beach umbeilla

47,98 €
47,98 € 54,01 €
You save 11% (6,03 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This beach umbrella for all types of weather has a diameter of approx. 1.8 m. With a swinging design and a unique look, it is ideal for restaurants, beach clubs, beach bar and the house garden. It can also be a decorative and functional complement for pools, hotels or wellness facilities. The upper cover consists of 5 individual carpets that are fixed to the metal structure. The final segment covers the upper part of the umbrella. The steel structure with powder coating gives the entire structure stability and, at the same time, an appearance of filigree. The high quality umbrella cover and polyester lining make this product resistant and durable for all types of weather. The umbrella can be tilted as necessary to provide shadow effectively at different times.

  • Long of the Upex Arch: 180 cm
  • Upex diameter: 160 cm
  • Height: 185 cm
  • Material: Steel Structure and Cover PP
  • FINISH: Powder coating
  • Stick formed by two parts
  • Practical inclination design
  • With durable material
  • Hawaiian style
  • Material: Polyester: 100%

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.