Iglú tent 8 yellow people 650x240x190 cm

204,59 €
204,59 € 230,26 €
You save 11% (25,67 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This tent has wide space for up to 8 people with luggage. It is perfect for a family camp with children or a weekend with friends. Durable and stable material: This store awning is made of 180 T breathable polyester fabric with PA coating, which helps block most harmful rays. Against dirt and growing soil moisture, the Oxford fabric floor film inside is well sewn to the tent. Its robust fiberglass structure guarantees stability and durability. Good ventilation: both sides with mesh windows ensure the entry of fresh air and keep insects away. Zipping doors allow to enter and leave easily. It also includes anchoring piquetas to improve stability with strong wind. Practical base: delivery includes the travel bag to facilitate transport and storage. Useful information: The tent is designed for rare and short -term use (performance level 1). Although rain -resistant, these stores should be used mainly in good weather.

  • Color: yellow
  • Material: fabric (100 % polyester) with PA coating, fiberglass
  • Dimensions: 650 x 240 x 190 cm (length x width x high)
  • Houses up to 8 people
  • Breathable air ventilation
  • Door with zipper and mesh windows
  • Requires assembly: Yes
  • Delivery contains:
  • 1 x ttienda of Iglú campaign
  • 33 x piquetas
  • 14 x strings
  • Weight: 8.7 kg
The product is not suitable for climatic conditions such as strong winds, snowfall and extreme climatic conditions.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.