LED retractable awning and anthracite gray wind sensor 300x250cm

520,99 €
520,99 €
Tax included. Shipping calculated at checkout.

Description

Create a modern and pleasant place in your patio and protect yourself with UV rays with our retractable awning! This awning is ideal to shade windows, balconies, patios, coffee shops and restaurants with rear porches. Light but robust and aluminum structure with powder coating and oxide resistant, this outdoor awning can resist winds of a certain scale. It is equipped with a wind sensor that closes the awning automatically on strong wind days. The awning fabric is made of high density polyester with PU coating, which is water resistant, UV rays and discoloration. You can open and close the awning with the long crank. The adjustable height and angle of the awning provide maximum protection. In addition, the arm is equipped with LED lights that provide low consumption lighting at night. The awning is easy to mount on the wall. The manual and the necessary material are included in the delivery.

  • Color: Anthracite gray fabric + gray structure
  • Material: Aluminum structure with powder coating + fabric
  • Total dimensions: 300 x 250 cm (length x wide)
  • Repeals water and dirt
  • Fabric (100% polyester) with UV antirrayos treatment
  • Includes LED strip
  • Easy to open and close with the crank
  • It closes and opens automatically thanks to a windless wind sensor
  • Requires assembly: Yes

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.