Skip to product information
  • Leifheit Deshuesador de cerezas Cherrymat 3.0

Leifheit Cherrymat 3.0 Cherry Bone

41,63 €
41,63 € 46,86 €
You save 11% (5,23 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

With this Leifheit 3.0 cherry polishing easy to wear, you can remove the cherry bone on the kitchen table to prepare a delicious cherry cake or cherry jam. Cherry boner is an expert in separating fresh and canned cherries in bone pulp without crushing them. You can remove the heart of up to 15 kg of fresh cherries in one hour thanks to the special construction of the Cherrymat. The cherries are heading to a filling container and rolled through the funnel one by one. Then, stainless steel leaves decoraciate carefully without being crushed. The pulp is wrapped in a bowl, while the bones fall into the large container that remains stable on 4 non -slip legs. At the same time, the next cherry falls into the boneless. Thanks to the large and transparent collection container, you can remove the bone from many cherries without having to worry about dirtying the nuclei. After use, you just need to empty the container and wash the device thoroughly with running water.

  • Color: White
  • Material: Plastic and stainless steel sheets
  • To bone cherries quickly and easily
  • Bone up to 15 kg of fresh cherries in an hour
  • Carefully separate bone cherries without crushing them.
  • The non -slip handle allows comfortable and safe job
  • Easy to clean up with running water
Safety standards 1. Use cherry bonus only as described in this manual. 2. Children should not play with the device. Children should not clean or perform maintenance tasks in the device without supervision. 3. Only for domestic use. 4. Warning! When manipulating the metallic plunger, there is a risk of lesions at the sharp edges.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.