Skip to product information
  • Leifheit Tendedero de pie Pegasus 200 Solid Comfort 81516

LEIFHEIT FOOT TEREDADERO PEGASUS 200 SOLID COMFORT 81516

108,02 €
108,02 € 121,57 €
You save 11% (13,55 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

The Flagasus 200id Comfort 81516 tarer of the Leifheit brand will be ideal for drying clothes. Thanks to parallel support legs, it is very stable and, thanks to the rod -resistant powder coating rods, it is suitable for both users and interior. It has space for two washing machine charges. Long garments such as bath towels or pants can be hung on drop -down side wings. The height of 107 cm prevents these long garments from touching the ground. The two outer rods of the wings have been designed with a wavy shape to hang clothes hangers. Five hangers "wind proof" are included. They fit into place and do not fall from the rods, even with very strong winds. As a practical complement, the Pegasus 200 Solid Comfort is delivered with a bag for clothing tweezers, which can be placed in one of the rods with the self -adherent closure, so that you can have the clamps by hand. Two smaller garments are also included, where you can hang socks, handkerchiefs or pants easily and quickly, without the need for clothing tweezers. The 200id Comfort pegasus stand -standing clothes is easy to ride and fold.

  • Dimensions (deployed): 167 x 66 x 87 cm (wide x high x high)
  • Drying length: 20 m
  • Wings height: 107 cm
  • Capacity: 2 washing machine loads
  • Resistant and stable clothesline to use inside and out of home
  • With special dust coating on the rods
  • With wings to dry long garments
  • Includes 2 hangers for small objects, 5 windproof hangers, a clothing tweezers and a wavy rod to hang hangers
  • Easy to install and fold

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.