Skip to product information
  • Leifheit Portarrollos de cocina de pared Parat Plus blanco 25723

LEIFHEIT PARAT PLUS PLUS WALL KITCHEN PORTARROLLOS 25723

49,26 €
49,26 € 55,45 €
You save 11% (6,19 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

The Pararat Plus wall portarrolls of Leifheit has a robust plastic construction and accurate adhesive because it is difficult to find the end. After cutting, the ends of the sheet are always easy to find and grab for next time. Sharp blades are hidden behind the cutting handles with ergonomic shape. The wall mounting portarrolls not only has space for aluminum foil, film and cooking roll, but also has incorporated dispensers for freezer bags and adhesive tape, as well as a container for small items such as clips, tweezers or gumillas. Remove the plastic housing, place the rolls and the portarrolls mounted on the wall will be ready for use. It is suitable for all commercial roll sizes (rolls, adhesive tape and small articles not included).

  • Color: White
  • Material: Plastic
  • Reliable portarrolls with space for aluminum foil, transparent film, kitchen rolls and freezer bags
  • With an adhesive tape dispenser and a container for small items such as clips, clamps or elastic bands
  • Special blades for clean edge cuts
  • The leaves are always easy to find and grab
  • Simple installation on the wall
  • The rolls, the adhesive tape and the small items are not included
Important: When inserting, the two ends of the films must be up. Throw the ends of the films not towards the edge of a cut. Push the cut slider to the side

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.