Skip to product information
  • Vetonek Lona gris 5x8 m 650 g/m²

Lona gris 5x8 m 650 g/m²

272,14 €
272,14 € 306,29 €
You save 11% (34,15 €)
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

Esta versátil y resistente lona es ideal para cubrir muebles de jardín, leñeros, remolques, coches, barcos, bicicletas, zonas de trabajo y materiales de construcción, y los protege de los elementos climáticos. Material duradero y resistente al agua: El toldo está hecho de lona de alta calidad con revestimiento de PVC, que la hace resistente al desgarro, resistente al agua, a los rayos UVA y resistente al moho, y se puede usar en temperaturas que varían de -30 °C a 70 °C.Prácticos ojales: La lona está equipada con ojales en todas las esquinas y a lo largo de los bordes para facilitar la sujeción.Fácil de limpiar y plegar: Cuando no la uses, puedes lavar, secar al aire y plegar la lona para guardarla sin que ocupe mucho espacio.Usos diversos: Esta versátil lona es ideal para cubrir zonas de mobiliario y materiales de construcción del jardín. También se puede utilizar como cubierta para un remolque abierto o una camioneta, una cubierta de techo temporal, un refugio de camping, etc.

  • Color: Gris
  • Material: Lona con revestimiento de PVC
  • Dimensiones: 5 x 8 m (ancho x largo)
  • Peso: 650 g/m²
  • Resistencia a la temperatura: -30°C a 70°C
  • Con ojales metálicos en todas las esquinas y a lo largo de los bordes
  • Resistente al desgarro y al agua
  • Resistente a los rayos UVA y al moho

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.